jtechdigital

The J-Tech Digital JTECH-FCAB158K 49.2 ft fiber optic HDMI 2.1 cable is designed for long-distance data transmission with no signal loss. Using active optical fiber instead of traditional copper wire as the transmission medium, the JTECH-FCAB158K can transmit 8K@60Hz / 4K@120Hz 4:4:4 HDMI signals with zero delay or latency and further distances when compared to copper HDMI 2.1 cables. The JTECH-FCAB158K fiber HDMI cable does not require external power to operate and provides higher immunity to EMI (electromagnetic interference) vs traditional copper HDMI cabling. ✅ 15M / 49.2 FT Cable Length ✅ HDMI Standard - HDMI 2.1 ✅ HDCP Compliance - HDCP 2.3 ✅ Data Rate – 48 Gbps Bandwidth ✅ Supported Resolutions - 4K@120Hz | 8K@60Hz ✅ HDR Supported – Dynamic HDR | Dolby Vision

The J-Tech Digital JTECH-FCAB154KEX 49.2 ft fiber optic HDMI 2.0 cable is designed for long-distance data transmission with no signal loss. Using active optical fiber instead of traditional copper wire as the transmission medium, the JTECH-FCAB154KEX can transmit 4K@60Hz 4:4:4 HDMI signals with zero delay or latency and further distances when compared to copper HDMI 2.0 cables. The JTECH-FCAB154KEX fiber micro HDMI cable does not require external power to operate and provides higher immunity to EMI (electromagnetic interference) vs traditional copper HDMI cabling. The JTECH-FCAB154KEX also features removable micro HDMI to HDMI adapters on both ends of the cable allowing users to achieve 4 different cable configurations as well as make running cable through tight spaces easier. 

The JTECH-4K120EX HDMI over Ethernet extender helps deliver 4K UHD resolution at 120Hz up to 120ft. over a single CAT 6A/7 cable. With support for HDR, you can now enjoy your favorite content in its full glory at 4 times the distance compared to a standard HDMI Cable. Bi-directional IR feature allows you to control your source device from the display’s location using the source devices remote, or control your display from the source device’s location using the display remote. Take advantage of the 2 EDID settings provided by the JTECH-4K120EX extender. Choose between “STD” mode for 4K 120Hz, or use the “TV” mode for EDID pass-through to the display. HDCP 2.3 (backwards compatible with 2.2 and 1.4) ensures compatibility with a wide variety of compatible sources and displays. Take advantage of the plug and play function, and integrate JTECH-4K120EX HDMI over Ethernet extender within your setup today! ✅ Resolution support up to 4K 120Hz 4:4:4 up to 120ft. over single CAT6A/7 (*Not compatible with Acer XV282K monitor for 4K 120Hz) ✅ Compatible with High Dynamic Range (HDR) video ✅ Supports HDCP 2.3, and backwards compatible with HDCP 2.2 and 1.4 ✅ EDID toggle switch setting to ensure compatibility ✅ Supports digital audio formats such as Dolby Digital, DTS, DTS-HD Master etc. ✅ Bi-Directional IR function to allow users to control their source device from displays location or vice versa

Experience superior signal distribution with the J-Tech Digital HDMI 1x2 Splitter, the most advanced HDMI 1.4–certified splitter on the market. With one HDMI input and two independent HDMI outputs, this splitter allows you to connect multiple displays without any loss in quality, even when only one display is active. Enjoy stunning Ultra HD 4K (3840×2160) and Full 3D video support with deep color up to 36-bit, ensuring vibrant and lifelike visuals. Compatible with high-definition audio formats including DTS-HD, Dolby TrueHD, LPCM 7.1, and DSD, it delivers a rich, immersive sound experience. ✅ HDMI 1.4b compliant for reliable performance. ✅ Full 3D video compatibility. ✅ Supports resolutions up to 3840×2160@30Hz (4K). ✅ Maximum baud rate of 3.2G and bandwidth up to 320MHz. ✅ Deep color support for 8/10/12-bit. ✅ AWG26 HDMI cable compatibility: input up to 10m, output up to 15m (for 4K, input up to 5m, output up to 10m). ✅ Ideal for displaying single-source, multi-output HD signals from DVD players, AV receivers, or set-top boxes. ✅ Powered by 5V / 1A adapter.

Distribute one HDMI source to up to four displays simultaneously with this true HDMI 1.4 Certified 1x4 HDMI Splitter. Designed for performance and reliability, it supports Ultra HD 4K (3840×2160) resolution, 3D video, and deep color up to 36-bit for stunning picture quality. Enjoy full compatibility with advanced audio formats, including DTS-HD, Dolby TrueHD, LPCM 7.1, DTS, Dolby-AC3, and DSD. Each output is independent, ensuring smooth operation even when only one display is active. Built to handle longer cable runs, this splitter supports input cable lengths up to 80 ft and output lengths up to 50 ft using AWG26 HDMI cables. With HDMI signal retiming, you’ll experience zero loss of quality for clear, reliable transmission every time. ✅ 1 HDMI input signal splits to 4 HDMI sink devices simultaneously. ✅ HDMI 1.4a compliant. ✅ 3D video support with frame packing for all 3D formats up to a 297MHz TMDS clock. ✅ Display resolutions up to 4K@30Hz, 1080P@120Hz, and 1080P 3D@60Hz. ✅ Deep color support: 30-bit, 36-bit, and 48-bit per pixel. ✅ Digital audio format support: DTS-HD, Dolby TrueHD, LPCM 7.1, DTS, Dolby-AC3, and DSD.

The J-Tech Digital JTECH-VW09 4K30Hz 3×3 video wall controller offers a unique and expandable video wall solution for nearly any application. The VW09 video wall controller supports USB Type-C (USB-C), VGA, Display Port and HDMI input source devices allowing it to be an incredibly flexible content sharing solution for a variety of applications including conference rooms and learning centers. Rotate any output image 180° in order to optimize the bezel layout of your video wall. Fine tune any display adjustments with the edge correction function. Users can also utilize the audio extraction function to de-embed or extract source device audio via the SPDIF coaxial or 3.5mm analog audio ports in order to incorporate a 3rd party audio processor. Create a truly immersive viewing experience by cascading multiple JTECH-VW09 video wall controllers together to form a 4K @ 30Hz 10×10 video wall that completely re-invents your interior space and leaves a lasting impression on all viewers. ✅ USB Type-C / VGA / DP / HDMI Inputs ✅3×3 Video Wall (Cascade units up to 10×10 video wall). ✅ 180° Output Image Rotation ✅ Supports Resolutions up to 4K@30Hz. HDCP 1.4 and 2.2 compliant ✅ EDID Management – 4K30Hz & 1080P 60Hz Default EDID ✅ SPDIF & Analog Audio Extraction ✅ 3rd Party Control System Integration via RS232 or LAN Ports

4x1 HDMI Switch – 4K@30Hz HDMI 1.4B Switcher with Auto-Switch & Picture-in-Picture (PiP) Function Simplify your setup with this 4x1 HDMI Switch, allowing you to connect up to four HDMI input devices to a single display and switch between them easily—no unplugging required. Perfect for TVs, monitors, projectors, and home entertainment systems. Enjoy stunning visuals with support for up to 4K@30Hz (HDMI 1.4B), including deep color and 3D video for an immersive viewing experience. Use the Auto-Switch feature to automatically detect active inputs or toggle it off for manual control. The Picture-in-Picture (PiP) mode (supported up to 1080p) lets you preview other connected sources before switching—ideal for multitasking or monitoring multiple devices. Easily operate your HDMI switch with the included IR remote control, giving you convenient access from anywhere in the room. ✅ 1 HDMI output port compliant with HDMI 1.4b specification. ✅ HDMI 1.4b and HDCP 1.4 compliant. ✅ Deep color support for 30-bit, 36-bit, and 48-bit. ✅ Supports Blue-ray 24/50/60Hz, DVD, and xvYCC color. ✅ Digital audio format compatibility: DTS-HD, Dolby TrueHD, LPCM 7.1, DTS, Dolby AC3, DSD. ✅ Signal equalizer for long-distance HDMI input. ✅ 3D video support with 25MHz–297MHz TMDS clock. ✅ Display resolutions up to 4Kx2K@30Hz and 297MHz TMDS clock rate. ✅ Built-in ESD protection and EDID RAM. ✅ Supports 1080P input up to 15m and 4K input up to 10m using AWG26 HDMI cable. ✅ Input selection via front-panel button or IR remote control. ✅ No loss of quality. ✅ Installs in minutes.

Introducing the JTECH-MV41AE 4x1 4K@30Hz HDMI multiviewer and seamless switcher. With 4 In and 1 Out HDMI ports, this HDMI quad multiviewer allows you to view up to four HDMI sources on a single display with seamless switching between devices, eliminating delays or black screens. Supporting resolutions up to 4K@30Hz, it is compatible with gaming consoles, security systems, and media players. With six viewing modes and a customizable Picture-in-Picture (PiP) function, it offers versatile display options. Additionally, it features audio extraction via optical and 3.5mm outputs for external sound systems and provides convenient control through included remote control, front panel buttons, and RS232 control. ✅ 4x1 HDMI quad multiviewer and seamless switcher. Features 4 In and 1 Out HDMI ports ✅Seamless switching between source devices without delay or black screen ✅ Features 6 different viewing modes and custom location picture-in-picture (PiP) function ✅ Supports up to 4K@30Hz resolution for crystal clear quality ✅ Audio extraction function via Optical or 3.5mm audio output ports

4x4 HDMI Matrix Switch – 4K@30Hz HDMI Splitter & Switch with RS232 and IR Control Create a fully customizable video setup with this 4x4 HDMI Matrix Switch, featuring 4 HDMI inputs and 4 HDMI outputs. Route any source to any display—or all displays simultaneously—for flexible video distribution across multiple screens. Enjoy crystal-clear visuals with support for up to 4K@30Hz resolution, fully HDCP 1.4 compliant and backward compatible with 1080P and 720P signals. Supports premium HD digital audio formats, including LPCM, DSD, DST, and DTS, for rich, high-quality sound. Easily control the matrix via RS232 connection or the included IR remote control. Built-in signal equalization and amplification ensure optimal transmission with no loss in video or audio quality. ✅ Display resolutions up to 4K×2K@30Hz, 1080P@120Hz, and 1080P 3D@60Hz. ✅ HDMI 1.4a video format compatibility. ✅ 3D video support with frame packing for all 3D formats up to 297MHz TMDS clock. ✅ Deep color support up to 48-bit per pixel. ✅ HDCP 1.4 (input) and HDCP v1.4 protocol compliant (output). ✅ Audio reception per HDMI 1.4 spec, supporting LPCM up to 192kHz, compressed audio (IEC 61937), DSD, DST, DTS, and HBR. ✅ Full colorimetry support including sYCC601, Adobe RGB, Adobe YCC601, and xvYCC extended gamut color. ✅ TMDS clock frequency operation up to 300MHz.

Upgrade your livestreaming setup with this powerful HDMI Encoder featuring H.264/H.265/MJPEG/NDI|HX2 compression, 4K@30Hz resolution, and support for RTMP, RTSP, ONVIF, and more. Perfect for creators, churches, events, and broadcasters, it lets you stream to up to 4 platforms simultaneously while monitoring locally via HDMI loop out. Easily embed analog audio from a mixer, record directly to USB, and manage your stream with the built-in LCD display and one-touch Start/Stop button. Whether you're live on popular streaming platforms or a custom RTMP server, this versatile video encoder delivers pro-quality results with plug-and-play ease. ✅ H.265 | H.264 | MJPEG Encoding ✅ Features Audio Input and HDMI Local Loop Output ✅ Supports UDP, HTTP, RTSP, RTMP, ONVIF, NDI HX2 Protocols ✅ CBR/VBR Rate: 16Kbps~16Mbps ✅ 100M Network Interface (full duplex mode) ✅ Up to 4K@30Hz HD Video Input ✅ Supports Image Parameter Settings ✅ Remote Management in WAN (webGUI) ✅ Supports Customized Resolution Settings

The J-Tech Digital JTECH-KVE2 HDMI & USB 2.0 KVM extender allows users to extend USB keyboard, mouse and HDMI signals up to 328 feet over CAT6 ethernet cable with near zero latency. This allows users to control a computer (or USB device) remotely up to 300+ feet away. Connect two remote HDMI displays to the receiver’s dual HDMI output ports and one local HDMI display to the transmitter’s local loop HDMI output port for flexible monitoring options. Extract source audio via the 3.5mm analog audio output ports found on both the transmitter and receiver so that users can route audio to a 3rd party audio processor/amplifier. Need to control multiple sources/computers? Check out the J-Tech Digital JTECH-KV41 4-Port HDMI USB KVM Switch (ASIN: B088WDDQQ2) ✅ Input Ports – (1) TX – 1 x HDMI In | 1 x USB 2.0 Type-B (2) RX – 1 x HDMI | 1 x RJ-45 | 1 x IR In | 2 x USB 2.0 Type-A ✅ Output Ports – (1) TX – 1 x HDMI Out (Pass-thru) | 1 x RJ-45 | 1 x IR Out | 1 x 3.5mm Audio Out (2) RX – 2 x HDMI Out | 1 x 3.5mm Audio Out ✅ Supported Resolutions– Up to 4K@30Hz ✅ Transmission Distance– 328 FT / 100M over CAT6 Solid Copper ✅ Supported Audio Formats– PCM, LPCM, Dolby Digital, DTS ✅ Power Supply– Input: 100-240VAC, 50/60Hz | Output: 5VDC 2A ✅ Dimensions– 5.12 in x 3.94 in x 0.87 in

The J-Tech Digital JTECH-AT5CH-V2 UHD 4K@30Hz audio extractor allows you to extract audio via an incoming HDMI signal, and send it to an external sound system. The unit will pass the video to the intended display as desired. This device is perfect for users trying to use TV speakers along with headphones, or trying to send an audio signal to a legacy sound system that doesn't have the newer connection. Use the SPDIF Optical to send either 2CH or 5CH audio signal, or the RCA outputs to send 2CH audio signal to your sound system. ✅ One HDMI input converted to one HDMI + Audio (SPDIF + R/L) output. ✅ Supports SPDIF and R/L analog audio output. ✅ Input resolution up to 4K@30Hz. ✅ HDMI synchronization for audio signal separation with PASS / 2.0CH / 5.1CH audio mode options. ✅ LED indicator shows source or sink status. ✅ No loss of quality. ✅ Easy to install within minutes. ✅ Requires DC 5V / 1A power supply. *Please Note: If you are not able to get audio from either Optical or 3.5mm output ports, please check your input source audio settings and ensure that the audio output is set to either PCM (For 3.5mm output), or PCM, DTS, or Dolby Digital (For Optical output). If the input source device is outputting Dolby Digital+ (DD+) or higher audio format, the extractor will not pass audio through the audio output ports.

Easily extend your HDMI signal over long distances with this 4K HDMI Extender over Ethernet. Transmit stunning 4K@30Hz video up to 132 feet and 1080P Full HD up to 230 feet using a single CAT6/7 cable — no signal loss, no lag. Featuring convenient Power over Cable (PoC) technology, this extender requires just one power adapter for both transmitter and receiver. Ideal for home theaters, conference rooms, digital signage, classrooms, and more. Includes local HDMI loop out for on-site display monitoring and a 3.5mm audio out for external audio system integration. Features an EDID toggle switch on the transmitter to help with compatibility issues between the connected input HDMI source device and the display. ✅ HDMI extender over ethernet Cat6/Cat7 ✅ 4K@30Hz up to 132ft. ✅ 1080P up to 230ft. ✅ Features a local HDMI loop out on transmitter for source monitoring ✅ 3.5mm audio extraction port on the receiver for extracting and sending audio to an external sound system ✅ Power over cable (PoC) function; power adapter is only required on the transmitter or the receiver side ✅ IR function to help control the source device from the display’s location ✅ EDID toggle switch to help with compatibility issues between the connected input HDMI source device and the display

Take your live broadcasts to the next level with this 4-channel HDMI livestream encoder, built for professional, high-quality streaming. Choose between H.264, H.265, or MJPEG encoding formats and stream effortlessly using multiple supported protocols, including UDP, HTTP, RTSP, RTMP, ONVIF, FLV, HLS, and SRT. Customize your stream with on-screen text or logos through an easy-to-use web interface. With 4 HDMI inputs, this encoder supports either 2× 4K@30Hz or 4× 1080P sources, allowing you to connect cameras, laptops, or media players for multi-angle or multi-source streaming. Stream up to 4 individual and simultaneous livestreams—each with one main and three substreams, for a total of 16 active streams. Add professional-grade sound by embedding analog audio through 3.5mm input ports, perfect for integrating soundboard or microphone audio. Ideal for eSports, live events, classrooms, and corporate streaming. ✅ H.264 and H.265 encoding for efficient video compression. ✅ Compatible with UDP, HTTP, RTSP, RTMP, and ONVIF network protocols. ✅ Adjustable CBR/VBR bitrate range from 32 Kbps to 32 Mbps. ✅ 1000M full-duplex network interface for stable, high-speed transmission. ✅ Accepts video input up to 4K@30Hz resolution. ✅ Image parameters configurable for optimized visuals. ✅ Remote management available via WAN through webGUI interface. ✅ Customizable resolution settings for flexible deployment.

The J-Tech Digital JTECH-UHC-4K30 UVC to HDMI Converter instantly transforms any UVC-compatible USB camera into a high-quality HDMI output for monitors, TVs, projectors, capture cards, and broadcast systems, making it ideal for live streaming, presentations, conferencing, and monitoring. Designed for long-term, reliable operation, it simultaneously charges your camera for uninterrupted use while an attached USB mouse allows easy on-screen adjustments to resolution, audio output, color saturation, brightness, and other settings without any software required. Fully compatible with popular USB cameras (webcams, action cameras, PTZ cameras etc), this plug-and-play converter delivers clean and stable HDMI video for both professional and everyday applications. ✅ Converts UVC USB camera signals to HDMI output for monitors, TVs, projectors, and capture cards. ✅Dual USB ports allow mouse control of camera settings directly through the connected HDMI display. ✅Supports simultaneous camera charging and video streaming through the same USB connection. ✅Compatible with a wide range of UVC USB cameras including webcams, action cameras, and PTZ cameras. ✅Powered through a reliable USB-C port for stable operation.

J-Tech Digital is proud to announce the JTECH-W6 USB-C + HDMI Wireless extender. The JTECH-W6 is designed to transmit HDMI or USB-C audio and video signals wirelessly up to 80 from an HDMI or USB-C source to an HDMI display within direct line of sight with ZERO latency! Experience 4K@30Hz and 1080P@120Hz video resolutions with zero delay, making it the perfect device for desktop or presentation applications as well as gaming. The JTECH-W6 supports high-definition digital audio formats like Dolby TrueHD and DTS-HD so that users don’t have to compromise their viewing experience for convenience. Connect USB peripheral devices to the USB ports on the transmitter to utilize data transfer and USB fast charging. A great solution for executives and office applications that feature displays across the room. ✅ USB Type-C Fast Charging ✅ USB-A Ports on Transmitter for USB Devices (mouse/keyboard/USB storage) ✅ Transmission Distance – 80 FT ✅ Zero Latency Transmission ✅ 4K 30Hz & 1080P 120Hz Resolutions Supported ✅ HD Audio Formats Supported – Dolby Digital | DTS | Dolby TrueHD | DTS-HD

The J-Tech Digital JTD4KSP0108 HDMI Splitter is a product which can distribute HDMI signal without loss to one or more display terminal device such as HDTV. It can optimize your home theatre system to the best effect. Fully HDMI 1. 4 Specification compliant. It is applicable to source device and high definition display terminal device such as Blu-ray Players and HDTV which have HDMI interfaces or digital interfaces. Supports high resolutions up to 4Kx2Kat30Hz, including 480i/P, 576i/P, 720i/P, 1080i, 1080p; Supports 12-bit Deep Full HD, Full 3D and 4Kx2K video; supports standard Audio, DSO Audio, HD (HBR) Audio. Extend the transmission distance and improve transmission signal with ease. ✅ One HDMI input signal split to eight HDMI sink devices ✅ Supports 3D, CEC, deep color 30bit, 36bit ✅ Supports Blu-Ray 24/50/60fs/HD-DVD/xvYCC ✅ Digital audio formats, as DTS-HD/Dolby-trueHD/LPCM7 1/DTS/Dolby-AC3/DSD ✅ Supports signal re-timing ✅ Input up to 15 meters AWG26 HDMI standard cable length ✅ No loss of quality ✅ Installs in minutes ✅ Works with DC5V/3A power supply

The JTECH-VWM04 is a 4-input, 4-output, seamless switching matrix, video wall controller and multiviewer device all rolled into one. While in matrix mode, seamlessly route any of your 4 available input signals to any combination of outputs without delay or picture loss. Want to view more than one signal on your single display at a time? No problem. Engage the multiviewer function on your output port and choose from 5 different multiviewer layouts, including 2x2, 1x3L, 1x3U, 1x4 & 4x1. Reinvent your interior space by taking advantage of the video wall function and have any source signal stretched across all 4 output displays. Arrange your output displays in up to 10 different video wall configurations, including 2x2, 1x4 and 4x1. 10 different video wall configurations means the user gets the exact style and creative expression they desire. ✅ 3 Different Operation Modes – Matrix | Video Wall Controller | Multiviewer ✅ Seamless Switching (< 40ms switching speed) | HDMI Video Output Port Mute function ✅ Output Scaling – 1080P / 720P / 2560 x 1440 / 1920 x 1200 / 1360 x 768/ 4K@30Hz ✅ HDMI Specification – HDMI 1.4, HDCP 2.2 | Supported Audio Format – PCM ✅ 10 Different Video Wall Configurations – 2x2, 1x4, 4x1 & more | 5 Different Multiviewer Presets – 2x2, 1x3L, 1x3U, 1x4, 4x1 ✅8 Customizable routing and display mode presets | Adjustable custom audio delay (0 – 250 ms) per output ✅ Variable Video Placement – Offset video content on both “x” & “y” axes & rotate 180°; Individual HDMI Output Color Settings – Brightness | Contrast | Saturation | Hue | RGB; Custom Source Selection and Crop & Zoom function for complete picture-in-picture customization

4K HDMI Extender over Cat5e/Cat6 – HDBaseT PoC Extender with IR & RS232 Control Extend high-quality HDMI signals over long distances with this HDMI Extender over Cat5e/Cat6 Ethernet cable, supporting resolutions up to 4K@60Hz (4:2:0) and 1080P up to 230 ft (70m). (Note: 4K 4:4:4 format not supported.) The unit features PoC (Power over Cable) technology—powering the receiver directly from the transmitter via a single Ethernet cable, simplifying installation and reducing clutter. Fully HDCP 2.2 / 1.4 compliant, this extender includes built-in ESD protection for safe, reliable operation. Enjoy bi-directional IR control and RS232 connectivity for firmware updates or serial command integration. Ideal for home theaters, conference rooms, classrooms, and digital signage applications, this extender delivers stable, high-quality video and audio transmission across long distances. ✅ HDMI 1.4 and HDCP 2.2 compliant. ✅ Transmission distance up to 40m for 4Kx2K and 70m for 1080p. ✅ Bi-directional 5V IR and RS232 pass-through for long-distance control. ✅ Bi-directional PoC for simplified wiring. ✅ CEC functionality supported. ✅ DIP switch for selecting Control or Update mode

4K HDMI Extender over Cat5e/Cat6 – HDBaseT 230ft 1080P / 130ft 4K HDMI 2.0 Extender with IR & RS232 Extend your HDMI signal over long distances with this HDBaseT HDMI Extender, delivering uncompressed 4K@60Hz (4:2:0) video up to 130 ft (40m) and 1080P up to 230 ft (70m) using a single Cat5e/6 Ethernet cable. Enjoy flawless, high-definition video and audio transmission without signal loss or delay. Compatible with HDMI 2.0 and HDCP 2.2/1.4, this extender supports a full range of resolutions including 4K, 1080P, 720P, 576P, and 480P, along with premium audio formats like LPCM, DTS-HD, Dolby TrueHD, and Dolby Digital. Includes bi-directional IR (20~60kHz) for remote control from either end and a Phoenix RS232 port for firmware updates or serial control integration. For the best performance, use solid copper Cat6 Ethernet cable—we recommend the J-Tech Digital 150ft Cat6 cable (model JTD-943) for optimal results. ✅ Plug-and-play pair of full-function modules, no configuration required. ✅ Uses a single UTP/STP LAN cable (CAT-5E/6) to replace HDMI for long-distance transmission. ✅ UTP/STP cable termination follows IEEE-568B standard. ✅ Transmission distance up to 70 meters for 1080P and up to 40 meters for 4K video. ✅ POC function (receiver powered by transmitter). ✅ HDCP 2.2 and 1.4 compliant. ✅ Full HD support: 1080P@60Hz@48bit, 3D, and 4Kx2K video formats. ✅ LED indicators display power status. ✅ Built-in ESD protection. ✅ Includes mounting ears for easy installation. ✅ Transfers bidirectional IR control signals along with HDMI signal. ✅ Phoenix RS232 port for firmware updates or RS232 signal transmission.