jtechdigital

The JTECH-UHDT150 is a professional UHD 4K@60Hz 4:4:4 HDR HDMI over ethernet extender solution. Users can transmit a 4K 60Hz signal up to 394 feet away over a single Cat5e/Cat6 ethernet cable. The JTECH-UHDT150 transmitter features a local HDMI output port for splitting your source signal locally and extending an output to a remote display. Utilize the built-in PoC (Power over Cable) function and power both your transmitter and receiver from only one power adapter. Installation is simple, quick and easy. The JTECH-UHDT150 will pass your display’s EDID information to your connected source device so that any signal compatibility issues will be resolved before they even begin. Flexible and appropriate for any application, the UHDT150 supports the latest audio and video standards including – HDR | HDR-10 | Dolby Vision | Dolby Digital + | DTS-HD Master & Dolby TrueHD. ✅ Supported Resolutions – 4K@60Hz (YUV 4:4:4), 4K@30Hz, 1080p/1080i, 720p/720i ✅ Supported Audio Formats – PCM, Dolby Digital 5.1, DTS 5.1, Dolby Digital + ✅ HDR Supported – HDR (8-bit) | HDR-10 (10-bit) | Dolby Vision (12-bit) ✅ Extend 1080P signals up to 492 ft and 4K signals up to 394 ft via single Cat5e/6 cable; HDMI Loop Output port on the transmitter ✅ HDMI 1.4 and 2.0 Compliant | HDCP 1.4 and 2.2 Compliant; De-embedded stereo audio output port on the receiver

The JTECH-4KMX256A is a versatile 16x16 4K 60Hz HDMI matrix designed to connect up to 16 HDMI sources and distribute their signals to 16 separate displays. It supports both one-to-many and many-to-many routing configurations, making it an ideal audio/video distribution solution for both commercial and residential setups. Additionally, the matrix includes 16 analog audio ports for creating an audio matrix. Enjoy content with full detail thanks to support for HDR, HDR10, and Dolby Vision. The unit can be easily controlled through various methods for your convenience. Smart EDID management ensures broad compatibility, while the 4K to 1080P downscaling feature allows you to mix and match displays without concerns about upgrading your equipment. ✅ 16 x HDMI Inputs | 16 x HDMI Outputs. Supports up to 4K 60Hz w/ HDR/HDR10/Dolby Vision | 16 x Analog audio (3-pin phoenix) ports for audio matrix function ✅ Supports digital audio formats such as Dolby Digital, Dolby Digital+ etc. Also supports ARC ✅ Features 4K > 1080P downscaling | Smart EDID management ✅ Control via front panel buttons, IR remote, RS232, web-based interface | Toggle individual video/audio signals on/off via the front LCD screen or web interface

The JTECH-SP12M18G is a 1 In 2 Out – 1x2 HDMI splitter that allows you to distribute a signal from one HDMI source to two displays simultaneously, mirroring the source on both screens. Supporting up to 4K@60Hz resolution with HDMI 2.0 and HDCP 2.2 compliance, it delivers stunning visual quality while remaining compatible with 1080P FHD. Its 4K-to-1080P downscaling feature enables seamless integration of mixed displays, letting you send 4K signals to a 4K screen and 1080P to a 1080P display at the same time. Equipped with three EDID settings—auto, copy, and downscale—it resolves compatibility issues effortlessly and supports both compressed and uncompressed digital audio formats. ✅ Distribute 1 HDMI signal to 2 displays simultaneously ✅ 1 HDMI input to 2 HDMI outputs for a 1x2 setup ✅ Note that this HDMI splitter duplicates/mirrors the signal, and does not extend the image ✅Supports up to 4K@60Hz resolution ✅Features 3 EDID settings; auto, copy, and downscale ✅4K > 1080P downscaling enables seamless compatibility with displays of different resolutions within your setup. ✅ Supports compressed and uncompressed digital audio formats

The JTECH-4KSP2 1 x 2 HDMI splitter is a Multi-Resolution Output HDMI scaler switcher that can support various UHD resolutions. This 1 x 2 HDMI splitter is perfect for users that are in the process of upgrading their entertainment centers and need a device that supports 4K and 1080p resolutions, allowing them to integrate newer, more advanced displays without having to replace their older model displays. *Please Note: the MRO series splitters do not downscale to 720P. They do not change the scan type (Progressive vs Interlaced) and they do not downscale HDR Metadata (HDR/HDR10/Dolby Vision). ✅ Supports up to 4K/60 Hz 4:4:4 HDR 10 and Dolby Vision ✅ HDCP 2.3 Compliant ✅ Built in signal equalizer (allows for the use of longer-range HDMI cables) ✅ EDID copy priority follows Output 1 > Output 2 ✅Supports 4K to 1080p, downscaling up to all output resolutions ✅Front panel HDMI downscale function on/off switch | Convenient firmware upgrades ✅ Power Supply: DC 5V/1A

J-Tech Digital's JTD-MINI-1x2SP 4K splitter allows you to take an audio/video signal from 1 source device, and distribute that to 2 displays. Supports up to 4K 60Hz 4:2:0 resolution, and backwards compatible with 1080P, 720P etc. Perfect for using with Blu-Ray players, Gaming Consoles, Desktop and Laptops. Easily integrate this unit within your setup whether it's a residential or commercial environment. ✅ 1 HDMI Input | 2 HDMI Outputs ✅ Resolution support up to 4K 60Hz 4:2:0 ✅ Supported Audio: LPCM,Dolby-AC3, DTS7.1, DSD/Dolby TrueHD/DTS-HD master audio ✅ EDID Duration: 6 seconds ✅ 3D ready (Compatible display & source required)

The JTECH-14EX60-AE HDMI extender splitter allows users to split an incoming HDMI signal to up to 4 displays. With the use of the included receivers, that signal can be extended up to 196ft. over single Cat5e/6 cable (per receiver) with ease. It also supports 4K > 1080P downscaling feature on the receiver end, so that users can utilize different resolution monitors within their setup. A local HDMI loop-out port is available on the transmitter so that users can monitor the source content on their remote displays via a local display. The JTECH-14EX60-AE also features PoC, where a power adapter is only required for the transmitter, and the receivers get their power from the transmitter via the connected ethernet cables, making for a clean setup. Take advantage of the audio extraction feature, and extract audio from the incoming HDMI signal, and send it to your favorite external sound devices via Optical and/or 3.5mm analog. Bi-directional IR gives users the ability to easily control their source device from the display’s location or vice versa. Built-in EDID DIP switch allows for different settings to help with source device and display audio/video format compatibility. ✅ Extend 4K@60Hz HDMI signal up to 196ft. over single Cat5e/6 ethernet cable (per receiver). HDMI 2.0 and HDCP 2.2 compliant ✅Features 1 HDMI input, 4 HDMI outputs, and a local HDMI loop-out port on the transmitter. Supports HDR10 and HLG ✅Audio extraction function available via Optical or 3.5mm audio outputs ✅Supports 4K > 1080P downscaling function (downscales on the receiver end) ✅PoC function; power adapter is only required for the transmitter, and the receivers get power from transmitter via the connected ethernet cable ✅Built-in EDID DIP switch with different settings to maintain audio/video format compatibility between source devices and displays. Supports Bi-directional IR function

The J-Tech Digital JTECH-14EX50 is an HDMI 2.0 splitter extender over single CAT cable. Designed to distribute your 4K HDMI source signal to multiple displays, the JTECH-14EX50 is fully HDMI 2.0 and HDCP 2.2 compliant. The JTECH-14EX50 features 4 PoC (power over cable) receivers that don’t require additional power adapters that can clutter up your installation. With the JTECH-14EX50, you have the ability of not only splitting your 4K source signal to 4 displays but the capability to extend the distance from your source to your displays as well. Utilizing the JTECH-14EX50 as a splitter/extender allows you to transmit your 4K 60Hz source signal up to 114 feet away over a single CAT6 cable while also connecting a 4K display to the transmitter’s local HDMI loop output. ✅ HDMI 2.0 | HDCP 2.2 Compliant ✅ 18 Gbps Video Bandwidth ✅ Supports Resolutions up to 4K@60Hz 4:4:4 ✅Supports 3D | HDR10 | HDR10+ | HLG | Dolby Vision ✅ Transmission Distance: 114 Feet (4K60) | 164 Feet (4K30) | 196 Feet (1080p60)

The JTECH-18GSP14M Splitter is an MRO (Multi-Resolution Output) splitter and can support various resolutions to the outputs. With 3 different EDID settings, you have the option of copying the EDID settings from your display for compatibility, mixing the output resolutions allowing for the combination of 4K and standard definition displays, and a fixed setting to distribute a 4K video signal to 4 displays. This MRO splitter is perfect for users that are gradually upgrading their entertainment centers and need a device that supports 4K and 1080p allowing for the integration of brand new displays while still making use of older and outdated ones. NOTE: the MRO series splitters do not downscale to 720P. They do not change the scan type (Progressive vs Interlaced) and they do not downscale HDR Metadata (HDR/HDR10/DolbyVision) ✅ Input ports: x1 HDMI ✅ Output ports: x4 HDMI ✅ HDMI Compliance: HDMI 2.0, HDMI 1.4 ✅ HDCP Compliance: HDCP 2.2, HDCP 1.4 ✅ HDMI Resolution: 4Kx2K@24/30/60Hz, 1080i/1080p ✅ Supports HDR10 and Dolby Vision ✅ 36-bit Deep Color

The JTECH-4KSP4 1 x 4 HDMI splitter is a Multi-Resolution Output HDMI scaler switcher that can support various UHD resolutions. This 1 x 4 HDMI splitter is perfect for users that are in the process of upgrading their entertainment centers and need a device that supports 4K and 1080p resolutions, allowing them to integrate newer, more advanced displays without having to replace their older model displays. *Please Note: The MRO series splitters do not downscale to 720P. They do not change the scan type (Progressive vs Interlaced) and they do not downscale HDR Metadata (HDR/HDR10/DolbyVision) ✅ Supports up to 4K/60 Hz 4:4:4 HDR 10 and Dolby Vision | HDMI 2.0, HDCP 2.3 Compliant ✅ Built in signal equalizer (allows for the use of longer-range HDMI cables) | EDID copy priority follows Output 1 > other outputs ✅ Supports 4K to 1080p, downscaling up to all output resolutions ✅ Front panel HDMI downscale function on/off switch | Power Supply: DC 5V/1A

The J-Tech Digital JTECH-18EX50 is an HDMI 2.0 splitter extender over single CAT cable. Designed to distribute your 4K HDMI source signal to multiple displays, the JTECH-18EX50 is fully HDMI 2.0 and HDCP 2.2 compliant. The JTECH-18EX50 features 8 PoC (power over cable) receivers that don’t require additional power adapters that can clutter up your installation. With the JTECH-18EX50, you have the ability of not only splitting your 4K source signal to 8 displays but the capability to extend the distance from your source to your displays as well. Utilizing the JTECH-18EX50 as a splitter/extender allows you to transmit your 4K 60Hz source signal up to 114 feet away over a single CAT6 cable while also connecting a 4K display to the transmitter’s local HDMI loop output. ✅ HDMI 2.0 | HDCP 2.2 Compliant ✅ 18 Gbps Video Bandwidth ✅Supports Resolutions up to 4K@60Hz 4:4:4 ✅Supports 3D | HDR10 | HDR10+ | HLG | Dolby Vision ✅Transmission Distance: 114 Feet (4K60) | 164 Feet (4K30) | 196 Feet (1080p60) ✅Local HDMI Loop Output Port ✅Advanced EDID Management ✅Supports PoC & IR Control Signal Pass-Thru

The JTECH-18GSP18M Splitter is an MRO (Multi-Resolution Output) splitter and can support various resolutions to the outputs. With 3 different EDID settings, you have the option of copying the EDID settings from your display for compatibility , mixing the output resolutions allowing for the combination of 4K and standard definition displays, and a fixed setting to distribute a 4K video signal to 8 displays. This MRO splitter is perfect for users that are gradually upgrading their entertainment centers and need a device that supports 4K and 1080p allowing for the integration of brand new displays while still making use of older and outdated ones. *Please Note: the MRO series splitters do not downscale to 720P. They do not change the scan type (Progressive vs Interlaced) and they do not downscale HDR Metadata (HDR/HDR10/DolbyVision) ✅ Input ports: x1 HDMI ✅ Output ports: x8 HDMI ✅HDMI Compliance: HDMI 2.0, HDMI 1.4 ✅ HDCP Compliance: HDCP 2.2, HDCP 1.4 ✅ HDMI Resolution: 4Kx2K@24/30/60Hz, 1080i/1080p ✅ Supports HDR10 and Dolby Vision ✅ 36-bit Deep Color ✅ Can support online firmware upgrades via Micro USB Port (if applicable)

The JTECH-AE4KA 4K HDMI audio extractor converts HDMI to RCA and Optical, allowing you to extract audio from HDMI signals. It sends audio to external systems via Optical and/or RCA outputs, while transmitting video to your display via HDMI. With HDMI-ARC support, you can also extract audio directly from the display via Optical. It supports resolutions up to 4K@60Hz (4:2:0) and offers 3 EDID modes for optimal audio decoding based on your setup. Note that HDMI-ARC extracts audio only through Optical, not RCA. For simultaneous audio from both outputs, set the incoming format to Stereo. Please note: This HDMI audio extractor supports 4K@60Hz (4:2:0 and 4K@30Hz (4:4:4). If your source device does not output 4K@60 (4:2:0), then lower the resolution 4K@30Hz or 1080P for the extractor to properly process the signal. Compatible with HDMI 1.4 and HDCP 1.4 standards. This HDMI extractor does not downmix 5.1Ch audio to be output via RCA. Ensure that your source device is outputting the correct audio format based on the audio output that is being used. Search ASIN B0F3F6TJW4 to view our audio downmixing HDMI audio extractor ✅ Extract audio via Optical and/or RCA from an incoming HDMI audio/video signal ✅ HDMI to RCA converter | HDMI to Optical converter. For simultaneous audio via Optical and RCA outputs, the incoming audio format must be set to stereo ✅ Supports HDMI-ARC functionality ✅ While using the HDMI-ARC function, audio can only be extracted via this audio extractors Optical output and not the RCA output ✅ Up to 4K@60Hz (4:2:0) resolution support ✅ Toggle switch with 3 EDID settings; TV, 2CH, and 5CH. Supports stereo audio format while using the RCA audio output, Stereo + 5.1CH for Optical SPDIF output, and up to 7.1 via HDMI output

Do you need to merge separate audio and video sources into a single HDMI signal? Whether you're creating video tutorials or revisiting live stream gaming, the JTECH-18GAEV2 is your solution! This device can embed HDMI video (up to 4K@60Hz 4:4:4) along with either multi-channel digital optical audio (TOSLINK/SPDIF) or analog audio (3.5mm/line) into one HDMI output. You also have the flexibility to retain the original HDMI audio instead of replacing it. This feature allows for more options without the hassle of swapping cables; simply flip a switch. Now, instead of just sharing video content, you can ensure your audience hears your commentary as they watch. ✅ Embed audio to the HDMI output via 3.5mm/line or SPDIF Optical ✅ 3.5mm supports up to stereo audio ✅ SPDIF Optical supports up to standard Dolby Digital ✅ Features HDMI audio passthrough up to 7.1ch ✅ Supports up to 4K@60Hz resolution with HDR support ✅ HDCP 2.2 compliance and also supports CEC bypass

The JTECH-4KSW3H1C is a 4x1 switch that features 3 x HDMI inputs & 1 x USB-C input that can be connected to a single display. It supports resolutions up to 4K 60Hz 4:4:4, so that you can enjoy your content in vivid details. The dual switching modes provides you with the ability to either automatically or manually switch between your connected input source devices. Don’t let your setup become limited because of the available number of HDMI ports on your display. The JTECH-4KSW3H1C provides you with extra ports so that you can connect all of your favorite devices to your existing display and easily toggle through them to use the one you would like! Support for HDR/Dolby Vision and digital audio formats is also available. Install this unit in your setup today and feel the ease of use without any compromise. ✅ 3 x HDMI Inputs + 1 x USB-C Input | 1 x HDMI Output ✅ Supports up to 4K 60Hz 4:4:4 resolution ✅ Dual switching mode | Switching between auto and manual source switching ✅ HDCP 2.2 and 1.4 compliant ✅ Supports full 3D video format ✅ Compatible with Thunderbolt 3 & DP 1.4 alt mode for USB-C Input ✅ Supports HDR, HDR10, and Dolby Vision ✅ Supports digital audio formats such as Dolby Digital, DTS, DTS-HD Master Audio etc. ✅ Includes IR remote for easy control

The JTECH-MV41A is a 4 input 1 output multi-viewer & seamless switcher. Users can now enjoy 4 different source devices on a single display in 4K resolution at 60Hz with no delay. Supporting 8 different display modes, users can fit and rearrange their HDMI sources as desired. Video aspect ratio changing ability allows users to eliminate any stretched out or out-of-frame images, while JTECH-MV41A’s audio extraction feature allows users to send audio to their external sound systems. The JTECH-MV41A is perfect for any residential or commercial install, and a great companion for audio/video distribution. ✅ 4 x HDMI Inputs | 4 x HDMI Outputs. Supports up to 4K 60Hz resolution with seamless switching ✅8 different display modes, including Picture-in-Picture (PiP), Picture-By-Picture (PBP), Triple View, Quad View etc. ✅ In Picture-in-Picture (PiP) mode, switch the location and the size of the in-screen picture. Choose from top-left, top-right, bottom-left, bottom-right ✅Video aspect ratio changing ability via OSD (Available in certain Pip, Triple, & Quad viewing modes) ✅Rearrange the HDMI sources on the screen via On-Screen Display (OSD) or the PC software. Easily identify the connected source device’s location via the on-screen labels ✅Audio extraction feature via RCA & Optical | Toggle between HDMI inputs to select active audio ✅ Digital audio format such as Dolby Digital, DD+, DTS, DTS-HD, up to 7.1 audio channel supported

The JTECH-MXT40B is a professional 4K 60HZ UHD matrix switch extender that can extend a 4K signal up to 130ft., and a 1080P signal up to 230ft. via HDBaseT over a single CAT5e/6 cable. Included are 4 HDMI inputs, and 4 local HDMI outputs along with 4 HDBaseT outputs for 4 included receivers. Each receiver provides 2 HDMI outputs, so users can connect a total of 12 displays to one matrix. Easily distribute and route your signal using the JTECH-MXT40B via web-based interface, RS232 commands, included IR remote, front panel buttons, or by using the J-Tech Digital Control App for Android and iOS. With support for HDR and Dolby Vision, enjoy your content without making any compromises for quality. The built in PoC function allows the HDBaseT receivers to get power from the main matrix, effectively keep your setup clean without any unnecessary cables. ✅ 4 HDMI inputs | 4 local HDMI outputs + 4 HDBaseT outputs. Dual HDMI outputs per HDBaseT receiver ✅ Extend 4K up to 130ft., and 1080P up to 230ft. | Supports up to 4K 60Hz 4:4:4 resolution ✅ Audio formats, such as PCM, Dolby Digital 5.1, DTS 5.1, Dolby Digital + ✅ HDMI 1.4 / 2.0 compliant | HDCP 1.4 / 2.2 compliant | Supports HDR / HDR 10, and Dolby Vision. (Dolby Vision supported by local HDMI outputs only) ✅ Power over cable function for easily and clean installation

The J-Tech Digital JTECH-MXT60 is a professional 4x4 HDMI 2.0 matrix extender solution for many different applications and industries where it is necessary to route multiple UHD source signals to multiple displays in different locations within your environment. Users can transmit a 4K 60Hz HDMI source signal up to 130 FT away via single Cat5e/6 ethernet runs to included MXT60 CAT receivers. Still using a 1080p TV or projector? No problem. The MXT60 HDMI matrix switch allows users to downgrade a 4K 60Hz source signal to 1080p 60Hz at each output, meaning you can still enjoy all of the latest and greatest content on your 1080p display until you’re ready to upgrade! ✅ HDMI 2.0b | HDCP 2.2/1.4 Compliant ✅ Resolutions up to 4K 60Hz 4:4:4 supported on all HDMI & CAT ports ✅ 4 HDMI Inputs | 4 HDMI Outputs + 4 Mirrored CAT output ports ✅ Supports 4K60 to 1080p Downscaling for each output port ✅ HDR | HDR10 | HDR10+ | Dolby Vision | HLG Supported ✅ Transmission Distance: 130FT 4K | 230FT 1080p ✅ Advanced EDID Management ✅ 12V PoC (Power Over Cable) on all CAT ports

The J-Tech Digital JTECH-4KM44A is a professional UHD 4K@60Hz 4:4:4 HDR HDMI video distribution matrix switcher. With 18Gbps HDMI 2.0 support, the JTECH-M4KM44A 4×4 HDMI Matrix allows up to four UHD 4K sources to be independently routed to four UHD displays. All four outputs support audio de-embedding via coaxial S/PDIF or analog phoenix connectors. Pair the audio de-embedding function with the JTECH-4KM44A‘s EDID management tool (built in EDID + EDID copy) and you have an incredibly versatile and flexible HDMI routing system suitable for a number of applications. ✅ HDMI 2.0 | HDCP 1.4/2.2 Compliant | Supports HDR-10 | HLG | Dolby Vision ✅ 4 x HDMI 2.0 Inputs | 4 x HDMI 2.0 Outputs | 4 x Coaxial S/PDIF Outputs | 4 x Analog Phoenix Outputs ✅ Control via IR | RS232 | Web GUI ✅ Supports PCM 2.0 | Dolby True HD | DTS-HD Master Audio | LPCM 7.1 | Analog & Digital S/PDIF Audio Extraction ✅ Supports EDID Management & EDID Copy | Firmware Updates Available via USB Port

The J-Tech Digital JTECH-M44D is a professional UHD 4K@60Hz 4:4:4 HDR HDMI video distribution matrix. With 18Gbps HDMI 2.0 support, the JTECH-M44D 4×4 HDMI Matrix allows up to four UHD 4K sources to be independently routed to four UHD displays. Each output has the ability to downscale 4K content to connected 1080p displays without affecting the 4K source or other 4K displays. Pair the 4K downscaler with the JTECH-M44D ‘s EDID management tool (built in EDID + EDID copy) and you have an incredibly versatile and flexible HDMI routing system suitable for a number of applications. ✅ Up to 4K@60Hz with 24-bit RGB/YCbCr 4:4:4 ✅ HDR | HDR10 | HDR10+ | Dolby Vision Pass-thru ✅ Supports LPCM 7.1CH | Dolby TrueHD | DTS-HD Master Audio Formats ✅ Supports 4K 60Hz > 1080p 60Hz Downscaling ✅ Advanced EDID Management ✅ Flexible Control via Front Panel and/or Included IR Remote Control

The JTECH-4KMVM combines an HDMI matrix, video wall controller, and multiviewer in one compact device. Supporting up to 4K@60Hz resolution, it allows seamless routing of 4 HDMI inputs to 4 outputs with no delays or picture loss. As a video wall controller, it offers 7 display modes, including 2x2 and 1x4 layouts, with a 180° rotation function per display for 2x2 setups. The multiviewer feature provides 12 viewing modes, including Picture-in-Picture (PIP) and 1 big, 3 small layouts, for displaying up to 4 sources on a single screen. Advanced audio features include sound extraction and routing via 3.5mm or SPDIF outputs for precise mixing. Its sleek, space-saving design ensures easy installation and a clean, professional setup. ✅ Features seamless HDMI matrix, video wall controller, and multiviewer function in one small and compact design ✅ Supports 4x4 HDMI matrix function with seamless switching ✅ Video wall controller with 7 display modes; 2x2, 1x4, 1x2, 1x3, 1x4, 2x1, 3x1. Supports 180° degree rotation per display in the 2x2 mode ✅ 4x1 multiviewer function with 12 different modes, including 4 equal screens, dual up/down, dual side by side, PIP, 1 big 3 small mode, and more ✅ Supports audio extraction via 3.5mm and/or SPDIF outputs from the HDMI inputs. Also features audio routing, allowing you to mix and match audio and video signals from HDMI sources and 3.5mm audio in ports ✅ Control via remote control, front panel buttons, RS232, or webGUI