jtechdigital

The JTECH-AE4KA 4K HDMI audio extractor converts HDMI to RCA and Optical, allowing you to extract audio from HDMI signals. It sends audio to external systems via Optical and/or RCA outputs, while transmitting video to your display via HDMI. With HDMI-ARC support, you can also extract audio directly from the display via Optical. It supports resolutions up to 4K@60Hz (4:2:0) and offers 3 EDID modes for optimal audio decoding based on your setup. Note that HDMI-ARC extracts audio only through Optical, not RCA. For simultaneous audio from both outputs, set the incoming format to Stereo. Please note: This HDMI audio extractor supports 4K@60Hz (4:2:0 and 4K@30Hz (4:4:4). If your source device does not output 4K@60 (4:2:0), then lower the resolution 4K@30Hz or 1080P for the extractor to properly process the signal. Compatible with HDMI 1.4 and HDCP 1.4 standards. This HDMI extractor does not downmix 5.1Ch audio to be output via RCA. Ensure that your source device is outputting the correct audio format based on the audio output that is being used. Search ASIN B0F3F6TJW4 to view our audio downmixing HDMI audio extractor ✅ Extract audio via Optical and/or RCA from an incoming HDMI audio/video signal ✅ HDMI to RCA converter | HDMI to Optical converter. For simultaneous audio via Optical and RCA outputs, the incoming audio format must be set to stereo ✅ Supports HDMI-ARC functionality ✅ While using the HDMI-ARC function, audio can only be extracted via this audio extractors Optical output and not the RCA output ✅ Up to 4K@60Hz (4:2:0) resolution support ✅ Toggle switch with 3 EDID settings; TV, 2CH, and 5CH. Supports stereo audio format while using the RCA audio output, Stereo + 5.1CH for Optical SPDIF output, and up to 7.1 via HDMI output

The J-Tech Digital JTECH-AT5CH-V2 UHD 4K@30Hz audio extractor allows you to extract audio via an incoming HDMI signal, and send it to an external sound system. The unit will pass the video to the intended display as desired. This device is perfect for users trying to use TV speakers along with headphones, or trying to send an audio signal to a legacy sound system that doesn't have the newer connection. Use the SPDIF Optical to send either 2CH or 5CH audio signal, or the RCA outputs to send 2CH audio signal to your sound system. ✅ One HDMI input converted to one HDMI + Audio (SPDIF + R/L) output. ✅ Supports SPDIF and R/L analog audio output. ✅ Input resolution up to 4K@30Hz. ✅ HDMI synchronization for audio signal separation with PASS / 2.0CH / 5.1CH audio mode options. ✅ LED indicator shows source or sink status. ✅ No loss of quality. ✅ Easy to install within minutes. ✅ Requires DC 5V / 1A power supply. *Please Note: If you are not able to get audio from either Optical or 3.5mm output ports, please check your input source audio settings and ensure that the audio output is set to either PCM (For 3.5mm output), or PCM, DTS, or Dolby Digital (For Optical output). If the input source device is outputting Dolby Digital+ (DD+) or higher audio format, the extractor will not pass audio through the audio output ports.

Easily extract audio from your HDMI source with this HDMI Audio Extractor, designed to send high-quality sound to external audio systems via SPDIF Optical and RCA outputs. Enjoy simultaneous audio output through both ports when the input is set to stereo. This device supports HDMI ARC (Audio Return Channel), allowing you to extract audio from your TV through the SPDIF Optical port. (Note: ARC supports Optical output only; eARC not supported.) Experience sharp visuals with full support for 4K@60Hz, 1080P@120Hz, and 1080P@144Hz resolutions, along with HDR 10-bit color for enhanced picture quality. Fine-tune your setup using three selectable Audio EDID modes, ensuring the correct format for your sound system. Perfect for home theaters, soundbars, and AV receivers, this extractor delivers reliable, high-definition audio and video performance. ✅ HDMI 2.0b (18Gbps), HDCP 2.2, and DVI compliant. ✅ Supports video resolutions up to 4K2K@50/60Hz (YUV444). ✅ Extracts HDMI audio to multi-channel optical (SPDIF) or L/R analog audio. ✅ Optical audio supports LPCM 2CH, Dolby Digital 2/5.1CH, and DTS 2/5.1CH. ✅ Supports HDMI High Bit Rate (HBR) audio pass-through. ✅ Audio sample rates up to 192kHz. ✅ 10-bit HDR (High Dynamic Range) pass-through. ✅ Supports ARC and CEC bypass. *Please Note: If you are not able to get audio from either Optical or 3.5mm output ports, please check your input source audio settings and ensure that the audio output is set to either PCM (For 3.5mm output), or PCM, DTS, or Dolby Digital (For Optical output). If the input source device is outputting Dolby Digital+ (DD+) or higher audio format, the extractor will not pass audio through the audio output ports.

The HDMI 18Gbps Audio Extractor could extract audio signals from any HDMI compliant source to digital optical or analog stereo L/R audio outputs. Further, both input and output HDMI support video resolution up to 4K2K@50/60Hz (YUV444). It supports 10bits HDR (High Dynamic Range) pass through and HDMI high resolution digital audio formats bypass, LPCM 2CH, Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio, audio sampling rate up to 192 kHz. HDCP 2.2 and CEC bypass are supported. Please Note: If you are not able to get audio from either Optical or 3.5mm output ports, please check your input source audio settings and ensure that the audio output is set to either PCM (For 3.5mm output), or PCM, DTS, or Dolby Digital (For Optical output). If the input source device is outputting Dolby Digital+ (DD+) or higher audio format, the extractor will not pass audio through the audio output ports. ✅ Extracts HDMI audio to multi-channel optical (SPDIF) or L/R analog audio while passing video to the display ✅ Supports 3 different EDID settings to help achieve best audio format possible for the desired output ✅ Optical audio supports LPCM 2CH, Dobly Digital 2/5.1CH, DTS 2/5.1CH ✅ Video resolutions up to 4K@60Hz YUV 4:4:4: ✅ 10bits HDR (High Dynamic Range) pass through | Supports CEC bypass

The J-Tech Digital JTECH-4KAE HDMI 4K60 Audio Extractor with eARC/ARC is a high-performance HDMI audio extractor and digital to analog audio converter designed for modern home theater and professional AV systems. This HDMI to RCA L/R, HDMI to optical SPDIF, and HDMI audio out converter extracts digital audio from a single HDMI source while passing video through to a display. Supporting 4K at 60Hz UHD resolution, HDR, HLG, and Dolby Vision pass-through, the JTECH-4KAE delivers reliable, high-bandwidth video with no signal loss. Built-in eARC and ARC audio return allows audio from compatible TVs to be routed to soundbars, AV receivers, amplifiers, and powered speakers, with support for Dolby Atmos, Dolby AC-3, DTS, and LPCM audio formats, making it ideal for home theater, conference rooms, classrooms, and presentation environments. ✅ Extracts audio from a single HDMI input and outputs via Optical SPDIF and/or RCA L/R analog with HDMI video pass-through. ✅ Supports up to 4K@60Hz resolution with 3D video pass-through for high-quality, lossless viewing. ✅ Includes three EDID audio modes (ADV / 2.0CH / 5.1CH) to ensure optimal audio de-embedding and compatibility. ✅ Features an LED status indicator to confirm an active HDMI connection between source and display. ✅ Powered by a reliable DC 5V/1A power adapter for stable operation.

Easily extract or embed audio from your HDMI source with the JTECH-18GAE2. Convert HDMI audio to analog stereo (3.5mm) or digital optical (SPDIF) for seamless compatibility with older AV equipment, or embed external audio into your HDMI signal. Supports 4K 60Hz HDR10, 1080p 120Hz, and 1080p 144Hz content, and is fully HDCP 1.4 & 2.2 compliant. Customize audio output using built-in EDID settings (2CH/5.1CH) or pass-thru mode to optimize your home theater setup. Perfect for modern devices and legacy receivers alike. ✅ Supports analog audio embedding. ✅ DIP switch settings allow extraction of the digital HDMI audio signal from the HDMI input to 2-channel analog stereo output or 5.1-channel audio output. ✅ Supports PCM, Dolby 5.1, and DTS 5.1 audio formats. ✅ Supports resolutions up to 4K@60Hz with 18Gbps bandwidth. ✅ HDCP 2.2 and 1.4 compliant. ✅ Supports CEC. ✅ Supports firmware updates via USB.

The JTECH-AE8K audio extractor is the industry latest technology that allows users to extract audio from an incoming HDMI signal, and send it to their favorite external sound systems via HDMI, Optical SPDIF, and 3.5mm L/R audio outputs. It supports resolutions up to 8K@60Hz and 4K@120Hz, while providing users with all of HDMI 2.1 features. It is also HDCP 2.3 compliance to ensure compatibility with variety of sources and displays.  Take advantage of the HDMI-ARC function of the JTECH-AE8K. Customers can now send audio directly from their in-built TV content to external sound devices.  Please note that while using the ARC function, audio can only be extracted via the extractors Optical SPDIF port, and not the HDMI and/or 3.5mm L/R audio ports.  This JTECH-AE8K extractor supports PCM (via 3.5mm, Optical, HDMI Out Audio Only ports), DTS & Dolby Digital 5.1 (via Optical and HDMI Out Audio Only port), and up to 7.1ch audio (Via HDMI Out Audio Only port).  ✅ Resolution support up to 8K@60Hz | 4K@120Hz ✅ Extract via HDMI, Optical SPDIF, and/or 3.5mm L/R audio out ports. Simultaneous audio through multiple ports possible if they all support the same incoming audio format ✅ Features an HDMI out for video/audio, and HDMI out for audio only ✅ Supports HDMI 2.1 | HDCP 2.3 compliant. Compatible with HDR | 12-bit deep color ✅ Works with HDMI-ARC function ✅ While using the HDMI-ARC function, audio can only be extracted via the extractors Optical port ✅ Supports audio formats, such as: PCM (via 3.5mm, Optical, HDMI Out Audio Only ports) | DTS & Dolby Digital 5.1 (via Optical and HDMI Out Audio Only port) | Up to 7.1ch audio (Via HDMI Out Audio Only port)

The new J-Tech Digital JTECH-EXD2 audio extractor is the audio device you have been waiting for. Is your cable box, streaming device or computer missing the optical audio output port? Are you trying to incorporate Bluetooth, wireless headphones or hearing aids to your existing setup? Not a problem. The JTECH-EXD2 is a brand-new audio extractor device that features simultaneous audio downmixing. Thanks to the built-in Dolby Digital Decoder, each audio device in your configuration gets the ideal audio format. Surround sound formats can be extracted from your HDMI source device and sent to your soundbar or AV receiver via the SPDIF port while also simultaneously being downmixed into a stereo analog signal for your wireless headphones or hearing aids via RCA. This way, everyone gets the true audio experience they deserve. ✅ Supported Resolutions – Up to 4K @ 60Hz (YUV 4:4:4) ✅ Supported Audio Formats – PCM, Dolby Digital 5.1, DTS 5.1 ✅ HDR Supported – HDR (8-bit) | HDR-10 (10-bit); HDMI 1.4 and 2.0 Compliant | HDCP 1.4 and 2.2 Compliant ✅ 3 Audio EDID Options – 2CH – Stereo Audio Format ✅ Bitstream – Multichannel Audio Formats ✅ TV – Pass-thru of connected display’s EDID ✅ Dolby Digital Decoder allows downmix stereo audio signal to be output simultaneously via RCA ports

Upgrade your home theater or audio setup with this J-Tech Digital 4K@60Hz HDMI audio extractor, designed to convert HDMI audio into RCA (L/R) analog or optical (SPDIF) outputs for seamless connection to external speakers, AV receivers, or sound systems. Perfect for gaming consoles, Blu-ray players, streaming devices, and more, this extractor ensures superior sound quality with broad device compatibility. Enjoy crystal-clear 4K@60Hz UHD video with HDR support, fully compatible with HDCP 2.2/1.x devices, making it ideal for TVs, projectors, and monitors. The HDMI ARC function allows you to extract TV audio and send it to an external sound system via optical and L/R output (Note: eARC not supported) For enhanced audio flexibility, this extractor features 5.1 audio downmixing, converting Dolby Digital/DTS 5.1 surround sound into stereo audio for older speakers. The built-in EDID switch (TV, 2CH, 5CH modes) ensures seamless compatibility between your source device and display, eliminating audio/video issues. Whether you're setting up a home theater, gaming setup, or media center, this HDMI to RCA & Optical audio extractor delivers high-quality sound with unmatched versatility. ✅ Extract audio from an HDMI source and send it to an external sound system via SPDIF Optical and L/R audio outputs on the extractor ✅ Extract audio from an HDMI-ARC capable display, and send it to external sound system via SPDIF Optical and L/R audio outputs on the extractor ✅ Supports ARC but not eARC ✅ Supports up to 4K@60Hz UHD resolution along with HDCP 2.2 compatibility ✅ Audio downmixing; allows you to convert standard 5.1 audio to stereo ch. audio to pass via L/R output ✅ Includes EDID management via toggle switch to ensure smooth communication and reduce compatibility issues

Introducing the JTECH-8KAE HDMI Audio Extractor; Extract audio from an HDMI signal and send it to external sound systems via Optical SPDIF, L/R analog, or HDMI audio out ports, while passing through up to 8K@60Hz or 4K@120Hz video to your display. Supporting the latest HDMI 2.1 standards, it offers HDR, HDR10+, Dolby Vision, and HLG pass-through for stunning video quality. The unit features both eARC and ARC audio extraction, making it easy to route audio directly from an 8K or 4K source, or an ARC/eARC-enabled TV, to your preferred audio setup. It supports a variety of audio formats — including stereo, Dolby Digital 5.1, and up to 7.1-channel audio — with user-selectable EDID management via DIP switches for hassle-free compatibility with gaming consoles, media players, Blu-ray players, and more. Fully HDCP 2.3 compliant with CEC control support. ✅ HDMI audio extractor with eARC/ARC functionality ✅ Features L/R, Optical, and 2 x HDMI audio out ports for audio extraction ✅ Important Note: HDMI audio out ports labeled “Soundbar” and “AMP” must have corresponding devices connected to them. Swapping them may result in no audio from these HDMI audio out ports ✅ This unit does not downmix audio. Please ensure that your HDMI source device is outputting the correct audio format supported by the audio out port being used on the extractor ✅ Supports 8K@60Hz (4:2:0), 4K@120Hz (4:4:4) video resolutions ✅ HDMI 2.1 and HDCP 2.3 compliant ✅ Compatible with HDR, HDR10+, Dolby Vision, HLG pass-through ✅ Features EDID DIP switch to help avoid compatibility issues between source and display ✅ CEC control function helps control source via TV remote control (works with eARC/ARC function)