jtechdigital

The JTECH-NS24V3 24 port Gigabit Ethernet switch is designed for AV over IP distribution setups. Using compatible J-Tech Digital transmitters and receivers along with this switch, users are easily able to create an HDMI matrix, and use it within a one – many or many – many configurations. The J-Tech NS24V3 also features a user-friendly web interface that allows users to assign input/output status to the Ethernet ports, port routing function, add, remove, and give priority to user accounts, check switch status, factory reset the switch, and more! Users can also create presets to save their favorite configurations. ✅ Gigabit Ethernet switch designed for AV over IP distribution setups. Optimized to work with compatible J-Tech Digital transmitters and receivers ✅ 24 x Gigabit Ethernet ports that can be assigned as inputs or outputs. 4 x SFP uplink ports ✅ Port 1-23 can be assigned as inputs or outputs. Port 24 is reserved for switch management ✅ User-friendly web management system with following options, but not limited to: ✅ Assign ethernet ports as inputs or outputs and port routing. Add, remove, and assign priority to user accounts ✅ Create presets, check switch status, change switch IP to custom, reboot the switch or restore to factory settings ✅ Layer 3 management and supports CLI. Low power consumption and standard 19” 1U rack mount design

HDMI over IP Matrix Switch – 48-Port AV over IP Gigabit Network Switch | JTECH-NS48 Build a powerful and flexible HDMI over IP Matrix with the JTECH-NS48 NxN Switch Matrix. Connect up to 46 encoders and decoders to route any HDMI source to any display in any combination you choose. Save up to four routing configuration presets for quick access and easy switching. Easily control and configure your system using the J-Tech Digital Control App (available on Google Play and iOS App Store) or integrate seamlessly with Control4 and Crestron systems for professional automation. Simplify AV over IP setup with automatic VLAN configuration, eliminating complex IT setup while maintaining smooth, reliable performance. The 48-Port AV over IP Gigabit Network Switch also supports unknown Unicast, Broadcast, and Multicast Storm Control, ensuring stable and efficient network operation for your AV matrix. Perfect for digital signage, video walls, classrooms, corporate installations, and large-scale AV systems. ✅ 10Mbps/100Mbps/1000Mbps network switch optimized for J-Tech Digital HDMI extender matrix systems. ✅ Ports 1–46 configurable as input or output with user-friendly web GUI for port-to-port routing. ✅ Ports 47 and 48 dedicated for management and user administration. ✅ Firmware upgrades and free technical support provided by J-Tech Digital. ✅ Android control app available on Google Play (“J-Tech Digital Control”) for convenient operation.

The J-Tech Digital JTECH-NSP48, 48 Port PoE Gigabit Managed Ethernet Switch is designed for use with J-Tech Digital N2N transmitters and receivers for creating a flexible AV over IP setup. With necessary functions such as VLAN, IGMP Snooping, Jumbo Frames etc., route AV over IP signals with ease, and using web-based interface for control, users are able to control all aspects of the switch without any hassle. Providing 48 ports for J-Tech Digital’s N2N encoders and decoders (JTD-210 & JTD-211), you can now create your own AV over IP matrix; use it as a standalone matrix, or integrate it as a part of an existing network with ease. ✅ 48 x PoE Ports @ 600W | 4 x SFP Uplink Ports | Max power of single PoE port for IEEE 802.3af devices 12.5W ✅ Web-based Interface or Telnet for convenient control ✅ PoE Management, IGMP Snooping, MLD Snooping, Jumbo Frames (enabled by default) ✅ ACL, QoS, NTP, Port Mirror Functions | Supports SNMP v1/v2/v3, STP/RTSP.MSTP ✅ V-Ring loop redundancy technology. Self-healing time for looped network is less than 20ms | 1x authentication to port and MAC