jtechdigital

The JTECH-EX100M2 allows users to extend their full HD 1080P 60HZ audio video signal up to 328ft over a single CAT5e/6 cable. The extender also supports HDMI 1.4 and is HDCP 1.4 compliant to eliminate any content viewing restrictions. The built-in IR function allows users to control their source from the display’s location with ease. No more having to walk back and forth between the display and the source to change volume, channel etc. The JTECH-EX100M2 can be used for a point – point connection, or a one – many connection. The TCP/IP ability of the extender allows for it to be ran through a network switch, where one transmitter and multiple receivers can be connected for one A/V signal to be distributed to multiple displays without any hassle. ✅ Supports up to 1080P 60Hz resolution up to 328ft. (100m) ✅ H.265 Encoding resulting in lower bandwidth usage while providing high image quality ✅ HDMI 1.4 | HDCP 1.4 Compliant ✅ Supports One – One or One – Many setup ✅ IR extension function to allow source device control from displays location

*Please note that this listing is for a Receiver only which is compatible with JTECH-EX-120MV2 (JTD-3176) HDMI extender over ethernet kit. Introducing the JTECH-EX-120MV2 by J-Tech Digital; 1080P 60Hz HDMI extender over single ethernet Cat5e/6/7 cable. Extend Full HD 1080p video up to 400ft (120m) or 720p HD video up to 660ft (200m) with zero latency and crystal-clear quality. This one-to-many HDMI extender allows you to distribute one HDMI source to multiple displays over a LAN network. Featuring an HDMI loop-out on the transmitter, it enables local monitoring while extending the HDMI signal for real-time surveillance, gaming setups, and control rooms. Supporting 480p, 720p, 1080i, and 1080p resolutions with 4.95Gbps high-speed bandwidth and TCP/IP protocol compatibility, this HDMI over Cat6 extender ensures seamless, lag-free video transmission for professional and commercial AV applications. ✅ Please note that this listing is for a Receiver only which is compatible with JTECH-EX-120MV2 (JTD-3176) HDMI extender over ethernet kit. ✅ HDMI extender over single Cat5e/6/7. Extend 1080P up to 400ft. and 720P up to 660ft. ✅ Supports HDMI over IP (AV over IP) for a One-to-Many HDMI signal distribution setup ✅ Features three modes: simple, allocation, and infinite mode (via network switch) ✅ Features an HDMI loop-out on the transmitter for local source monitoring ✅ IR control for controlling the source device from displays location

Introducing the JTECH-EX-120MV2 by J-Tech Digital; 1080P 60Hz HDMI extender over single ethernet Cat5e/6/7 cable. Extend Full HD 1080p video up to 400ft (120m) or 720p HD video up to 660ft (200m) with zero latency and crystal-clear quality. This one-to-many HDMI extender allows you to distribute one HDMI source to multiple displays over a LAN network. Featuring an HDMI loop-out on the transmitter, it enables local monitoring while extending the HDMI signal for real-time surveillance, gaming setups, and control rooms. Supporting 480p, 720p, 1080i, and 1080p resolutions with 4.95Gbps high-speed bandwidth and TCP/IP protocol compatibility, this HDMI over Cat6 extender ensures seamless, lag-free video transmission for professional and commercial AV applications. ✅ HDMI extender over single Cat5e/6/7. Extend 1080P up to 400ft. and 720P up to 660ft. ✅ Supports HDMI over IP (AV over IP) for a One-to-Many HDMI signal distribution setup ✅ Features three modes: simple, allocation, and infinite mode (via network switch) ✅ Features an HDMI loop-out on the transmitter for local source monitoring ✅ IR control for controlling the source device from displays location

*Please Note: This is a transmitter only that is designed to work with JTECH-EX-120M-UN-R (JTD-792) receiver. J-Tech Digital ProAV Unlimited HDMI by Single Ethernet Cable up to 400ft is most advanced TCP/IP HDMI extender matrix on the market. It is a flexible and powerful alternative and combination of HDMI extender and HDMI matrix. Three Working Modes Three modes includes point-to-point, point-to-many & many-to-many. For point-to-point mode, HDMI signal can be extended up to 120m (394ft) over a single Cat5E/6 cable. Any-to-Any Broadcasting Extend your HDMI signal from any source to any receiver can never be too easy. By configuring J-Tech Digital customised gigabit network switch (JTECH-EX-120M-UN-S), you can stream your HDMI signal to one receiver or many receivers; also, receiver can pick the signal from any of the transmitters. The network switch can be cascaded to form a many-layer network to support a large HDMI extender system. Standard TCP/IP Protocol HDMI signal is repacked into IP packets. Each receiver and transmitter has a unique IP address which you can manually set by logging into their web GUIs. ✅ HDMI 1.4b, HDCP 1.4, and DVI compliant for reliable compatibility. ✅ Supports video resolutions up to 1080P@60Hz. ✅ Audio compatibility with LPCM 2.5/1.7.1CH, Dolby 5.1CH, Dolby TrueHD, and DTS-HD formats. ✅ Quad multi-viewer with five selectable display modes. ✅ Audio output can be assigned from any input source. ✅ Control options include front-panel buttons, IR remote, and RS-232 commands.

*Please Note: This is an HDMI extender receiver only that is designed to work with JTECH-EX-120M-UN-T(JTD-791) transmitter. J-Tech Digital ProAV Unlimited HDMI by Single Ethernet Cable up to 400ft is most advanced TCP/IP HDMI extender matrix on the market. It is a flexible and powerful alternative and combination of HDMI extender and HDMI matrix. Three Working Modes Three modes includes point-to-point, point-to-many & many-to-many. For point-to-point mode, HDMI signal can be extended up to 120m (394ft) over a single Cat5E/6 cable. Any-to-Any Broadcasting Extend your HDMI signal from any source to any receiver can never be too easy. By configuring J-Tech Digital customised gigabit network switch (JTECH-EX-120M-UN-S), you can stream your HDMI signal to one receiver or many receivers; also, receiver can pick the signal from any of the transmitters. The network switch can be cascaded to form a many-layer network to support a large HDMI extender system. Standard TCP/IP Protocol HDMI signal is repacked into IP packets. Each receiver and transmitter has a unique IP address which you can manually set by logging into their web GUIs. ✅ HDMI 1.4b, HDCP 1.4, and DVI compliant for reliable compatibility. ✅ Supports video resolutions up to 1080P@60Hz. ✅ Audio compatibility with LPCM 2.5/1.7.1CH, Dolby 5.1CH, Dolby TrueHD, and DTS-HD formats. ✅ Quad multi-viewer with five selectable display modes. ✅ Audio output can be assigned from any input source. ✅ Control options include front-panel buttons, IR remote, and RS-232 commands.

The J-Tech Digital ProAV HDMI Extender/H.264 Encoder and Decoder features the most innovative technology and easy-to-use design. It is an ideal solution for different applications in different environments including home theater, church projection systems, bar screens, advertising screens, broadcasting stations, and public theaters etc. This model features three working modes. These three modes include a point-to-point, point-to-many & many-to-many configuration. Using the point-to-point mode, an HDMI signal can be extended up to 120m (394ft) over a single Cat5E/6 cable. With a Bi-Directional RS-232 passthrough, users can control RS-232 enabled devices, such as rotatable cameras, from a PC connected to their Transmitter. This extender encodes and decodes HDMI signals using H.264 compression, which significantly reduces the bandwidth usage while maintaining high video quality. These H.264 extenders can be used on your home network as long as your network router supports IGMP functionality. ✅ H.264 compression encoding with video resolutions up to 1080p@60Hz. ✅ Transmission distance up to 120m over a single Cat5e/6 cable with HDMI loop output. ✅ IR remote source selection with LED group ID display. ✅ TCP/IP protocol compliant with streaming bit rate up to 15Mbps. ✅ LPCM audio format compatibility. ✅ Smart IP addressing via Dynamic Host Configuration Protocol (DHCP). ✅ Wide-band IR pass-through for source control (38kHz–56kHz). ✅ Dual UART/RS232 interface (up to 115200) with remote group baud rate selection. ✅ Flexible transmission modes: one-to-one, one-to-many, many-to-one, or many-to-many with cascade support. ✅ HDCP compliant. ✅ PC tool control capability. ✅ Powered by DC 5V / 1A supply.

The J-Tech Digital ProAV HDMI Extender/H.264 Encoder and Decoder features the most innovative technology and easy-to-use design. It is an ideal solution for different applications in different environments including home theater, church projection systems, bar screens, advertising screens, broadcasting stations, and public theaters etc. This model features three working modes. These three modes include a point-to-point, point-to-many & many-to-many configuration. Using the point-to-point mode, an HDMI signal can be extended up to 120m (394ft) over a single Cat5E/6 cable. With a Bi-Directional RS-232 passthrough, users can control RS-232 enabled devices, such as rotatable cameras, from a PC connected to their Transmitter. This extender encodes and decodes HDMI signals using H.264 compression, which significantly reduces the bandwidth usage while maintaining high video quality. These H.264 extenders can be used on your home network as long as your network router supports IGMP functionality. ✅ H.264 compression encoding with video resolutions up to 1080p@60Hz. ✅ Transmission distance up to 120m over a single Cat5e/6 cable with HDMI loop output. ✅ IR remote source selection with LED group ID display. ✅ TCP/IP protocol compliant with streaming bit rate up to 15Mbps. ✅ LPCM audio format compatibility. ✅ Smart IP addressing via Dynamic Host Configuration Protocol (DHCP). ✅ Wide-band IR pass-through for source control (38kHz–56kHz). ✅ Dual UART/RS232 interface (up to 115200) with remote group baud rate selection. ✅ Flexible transmission modes: one-to-one, one-to-many, many-to-one, or many-to-many with cascade support. ✅ HDCP compliant. ✅ PC tool control capability. ✅ Powered by DC 5V / 1A supply.

J-Tech Digital proudly introduces this HDMI Extender Over Single CAT5e/CAT6 Cable 1080p with IR - Up to 400 FT. This professional signal transmission system which combines the function of HDMI signal conversion, reception and reduction over a long range without loss in quality. One twisted pair up to 400 feet (CAT6) can be extended indefinitely. Converts HDMI signals to standard TCP/IP and with the help of network devices, the transmission distance is virtually unlimited The JTD-EX-120M features HDMI network extender, IR synchronization technology,IR Frequency 38KHz-56KHz, Network splitter technology and Network extension technology. ✅ Input HDMI resolution: 480i@60Hz、480p@60Hz、576i@50Hz、576p@50Hz、720p@50/60Hz、1080i@50/60Hz、1080p@50/60Hz ✅ Output HDMI resolution: 480p@60Hz、576p@50Hz、720p@50/60Hz、1080p@50/60Hz ✅ Supports video color format: 24bit/Deep color 30bit/Deep color 36bit ✅ Support audio format: PCM ✅ Max transmission rate: 10.2Gbps ✅ Audio signal transmission format: L/R stereo audio ✅ TMDS signal: 0. 5-1. 5Vp-p (TMDS) ✅ Input cable length: ≤5m (AWG26 HDMI1. 3 standard cable) ✅ Output cable length: ≤5m (AWG26 HDMI1. 3 standard cable) *Please Note: We recommend using this extender with a separate network switch/router or a switch that supports VLAN.