jtechdigital

Users have the ability to daisy chain one receiver to another via Ethernet to share the source signal from the transmitter. Now, instead of running an additional Ethernet cable back to your equipment rack for each receiver, users can simply make a much shorter Ethernet run from one receiver to another. This daisy chain method saves users on Ethernet cable costs, simplifies installation and reduces the number of break points in your AV over IP installation. ✅ Fully scalable from residential rooms to campuses & large commercial enterprise applications ✅ 3 HDMI Extension & Distribution Modes – Point to Point / One to Many / Many to Many ✅ Transmission Protocol – TCP/IP ✅ Supported Resolutions – 480i@60Hz, 480P@60Hz, 576i@50Hz, 576P@50Hz, 720P@50/60Hz, 1080i@50/60Hz, 1080P@50/60Hz ✅ Supported Audio Format – PCM

The JTECH-4KSW3H1C is a 4x1 switch that features 3 x HDMI inputs & 1 x USB-C input that can be connected to a single display. It supports resolutions up to 4K 60Hz 4:4:4, so that you can enjoy your content in vivid details. The dual switching modes provides you with the ability to either automatically or manually switch between your connected input source devices. Don’t let your setup become limited because of the available number of HDMI ports on your display. The JTECH-4KSW3H1C provides you with extra ports so that you can connect all of your favorite devices to your existing display and easily toggle through them to use the one you would like! Support for HDR/Dolby Vision and digital audio formats is also available. Install this unit in your setup today and feel the ease of use without any compromise. ✅ 3 x HDMI Inputs + 1 x USB-C Input | 1 x HDMI Output ✅ Supports up to 4K 60Hz 4:4:4 resolution ✅ Dual switching mode | Switching between auto and manual source switching ✅ HDCP 2.2 and 1.4 compliant ✅ Supports full 3D video format ✅ Compatible with Thunderbolt 3 & DP 1.4 alt mode for USB-C Input ✅ Supports HDR, HDR10, and Dolby Vision ✅ Supports digital audio formats such as Dolby Digital, DTS, DTS-HD Master Audio etc. ✅ Includes IR remote for easy control

The JTECH-MV41V is a high performance 4x1 Quad Multi-Viewer with seamless switching. It can display 4 full HD 1080p input sources on one HDMI and one VGA screen simultaneously with zero latency. This device also has five different viewing modes, allowing you to display 2, or all 4 of your HDMI input sources at once in different layouts. This switch also gives you the ability to rearrange the layout of your video sources, allowing you to set your sources within any of the quadrants, in all of the available display modes. ✅ Video Bandwidth: 4.95Gbps | Video Resolutions: 1080p@60Hz, 720p@60Hz, 480p@60Hz ✅Color Space: RGB, YCbCr 4:4:4, YCbCr 4:2:2 | Color Depth: 10-bit, 12-bit ✅HDMI Audio Formats (Pass-through): LPCM 2.0 (44.1KHz, 48KHz) ✅HDMI Compliance: HDMI 1.4 | HDCP Compliance: HDCP 1.4 ✅ Input Ports: (4) x HDMI ✅ Output Ports: (1) x HDMI, (1) x VGA, (1) x 3.5mm Stereo (for VGA)

Introducing the J-Tech Digital JTECH-BE100 USB 2.0 Extender over single ethernet cable. USB 2.0 specifications only allow users to run USB 15 feet away and this distance limitation is not ideal for many different applications and environments. Enter the JTECH-BE100. Extend not one, but two USB 2.0 ports up to 328 feet away over a single CAT5E/6 ethernet cable. That’s over 21 times further than the USB 2.0 standard. The BE100 features 1 USB-B Port on the transmitter and 2 USB-A 2.0 Ports on the receiver device. This makes extending a keyboard and mouse to a remote computer incredibly easy. Installation is simple with no additional setup required. Simply connect your USB devices, USB cables, ethernet cable and power adapter and you’re done. A true plug & play installation to get you up and running fast. ✅ USB 2.0 (480 Mbps Data Rate) transmitted up to 328 FT over Single CAT5e/6 Ethernet ✅ PoC (Power Over Cable) – Only one power adapter is needed to power both transmitter & receiver ✅ Simple Plug Play Installation and Setup ✅ Transmitter – 1 x USB-B Port | Receiver – 2 x USB-A 2.0 Port

This encoder will take an HDMI audio/video signal, encode it using H.264, and give you the power to choose where to stream it to. Choose from any popular video upload site/service, one or more LAN computers using VLC/multicast, or a local surveillance system using ONVIF. ✅ Supports H.264 encoding / UDP, HTTP, RTSP, RTMPS, RTMP, ONVIF, MPEG1 Audio Layer 2 / CBR/VBR rate: 16Kbps ~ 16Mbps ✅100 M network interface uses full duplex mode / Supports up to 720p, 1080p@60Hz HD video input / Support image parameter settings ✅WEB interface management authority / Support remote management in WAN (WEB)/ Customized resolution settings ✅ One button factory reset

Say goodbye to arm and wrist strain caused by using a traditional mouse! The J-Tech Digital Wireless Vertical Ergonomic Mouse features a design that places your hand in a natural “handshake” position which greatly reduces strain on your wrist and arm especially during extended computer sessions. This wireless mouse features 2.4G wireless and 3.0 / 5.0 Bluetooth modes to allows for 3 multi-device connectivity. Made for small-medium sized hands and right-hand orientation, it’s never too late to start taking advantage of all the benefits that this wireless mouse has to offer! ✅ Features a vertical ergonomic design to reduce arm and wrist strain ✅ Works with 2.4G wireless and 3.0 / 5.0 Bluetooth modes. 3 multi-device functionality allows for connecting 3 devices and easy switching ✅ 3 power saving (sleep) modes: ✅ Level 1: Mouse inactive for 5s – 1 min. When mouse is moved, it wakes up ✅ Level 2: Mouse inactive for 1 min – 30 mins. When mouse is moved, it wakes up ✅ Level 3: Mouse inactive for more than 30 mins. Press a button to wake up the mouse ✅ 5 adjustable DPI modes; 800 / 1200 / 1600 / 2400 / 4000. Compatible with Windows and Mac OS

The JTECH-8KSP12 is a 1 In 2 Out HDMI splitter that supports up to 8K@60Hz resolution, along with 4K@120Hz and 1080P@240Hz. It is compatible with HDR / HDR10 / HDR10+, Dolby Vision, and also features 3 different EDID modes to ensure compatibility between your different resolution displays. Take advantage of digital audio formats, such as DTS, Dolby Digital, Dolby TrueHD, along with all of the features supported by HDMI 2.1. The JTECH-8KSP12 is also HDCP 2.3 compliant along with HDCP 2.2 and 1.4 backwards compliant to ensure compatibility between different sources and displays. Take advantage of the JTECH-8KSP12 splitters downscaling function where it can downscale an 8K@60Hz signal to either 4K or 1080P depending on the display involved. This splitter is perfect for situations where users may have 2 different displays that support 2 different resolutions. Plug and play function ensures a ready state, so go ahead and integrate this splitter within you setup today! ✅ Resolution support up to 8K@60Hz, 4K@120Hz, 1080P@240Hz ✅ Compatible with HDR / HDR10 / HDR10+ / Dolby Vision ✅ HDMI 2.1 | HDCP 2.3 (backwards compatible with 2.2 and 1.4) ✅ 3 Different EDID modes; Auto, Copy, and Downscaling ✅ Downscales 8K resolution to 4K or 1080P depending on the connected display ✅ Digital audio format support, such as DTS, Dolby Digital, Dolby TrueHD etc. ✅ Supports CEC function

Please Note: This listing is for a receiver only that works with the JTECH-WEX-660R transmitter / receiver kit Experience Full HD 1080P@60Hz video with low latency using the JTECH-WEX660 Wireless HDMI Extender Kit. Perfect for live TV, movies, gaming, and streaming, this set connects any HDMI source—such as cable boxes, PCs, or consoles—without the need for long cables. Extend your HDMI signal wirelessly up to 660 feet (200 meters) through walls, ceilings, and floors—no line of sight required. Connect up to four transmitter and receiver pairs in the same environment without interference. Featuring variable 5GHz frequency selection, you can avoid Wi-Fi congestion by choosing your operating channel and customizing SSID settings via the built-in web interface. Enjoy stable, high-quality transmission of HDMI 1.4 signals for professional, home, or commercial use. Perfect for home theaters, conference rooms, classrooms, digital signage, and AV installations, this wireless HDMI extender combines range, performance, and reliability in one powerful solution.

J-Tech Digital Multi-Functional HDMI Audio Extractor with 8 Inputs is the most complete solution for your HOME Theater Configuration. This device offers the ultimate solutions for digital entertainment center, HDTV retail or show sites, HDTV, STB, DVD and projector factory, conference presentation, school or corporate training environments. You can manage all your various audio and video sources together from analog AV to 3D HDMI with surround sound capability for your latest HDTV home theater setup. *Please Note: Please change the audio setting to Stereo in your Apple TV in order to have sound output. Only for Apple TV. ✅ 8-inputs-1 output multi-function video/audio switch; ✅ Inputs contain 2x YPbPR / Component Video, 2x AV, 1x VGA+3.5mm audio, and 3x HDMI; outputs contain 1 HDMI output, 1 optical and 1 coaxial audio output; ✅ Allows display to view any 1 of the 8 sources at any time; ✅ EDID Manipulation Feature to Support 2CH Stereo, 5.1/6CH or 7.1/8CH Surround Sound from HDMI inputs; for 1080P HDTV home theater setup; ✅ Supports output formats 480P, 576P, 720P, 1080i to 1080P with 3D; ✅ Automatically upscale 480i and 576i to 480P and 576P on component and AV inputs ✅ HDMI v1.3, supports HDMI v1.4 3D; ✅ Delivers uncompressed digital video without signal loss; ✅ Dual switching modes: IR Remote or Manual Button on the Unit;

The JTECH-MXT40B is a professional 4K 60HZ UHD matrix switch extender that can extend a 4K signal up to 130ft., and a 1080P signal up to 230ft. via HDBaseT over a single CAT5e/6 cable. Included are 4 HDMI inputs, and 4 local HDMI outputs along with 4 HDBaseT outputs for 4 included receivers. Each receiver provides 2 HDMI outputs, so users can connect a total of 12 displays to one matrix. Easily distribute and route your signal using the JTECH-MXT40B via web-based interface, RS232 commands, included IR remote, front panel buttons, or by using the J-Tech Digital Control App for Android and iOS. With support for HDR and Dolby Vision, enjoy your content without making any compromises for quality. The built in PoC function allows the HDBaseT receivers to get power from the main matrix, effectively keep your setup clean without any unnecessary cables. ✅ 4 HDMI inputs | 4 local HDMI outputs + 4 HDBaseT outputs. Dual HDMI outputs per HDBaseT receiver ✅ Extend 4K up to 130ft., and 1080P up to 230ft. | Supports up to 4K 60Hz 4:4:4 resolution ✅ Audio formats, such as PCM, Dolby Digital 5.1, DTS 5.1, Dolby Digital + ✅ HDMI 1.4 / 2.0 compliant | HDCP 1.4 / 2.2 compliant | Supports HDR / HDR 10, and Dolby Vision. (Dolby Vision supported by local HDMI outputs only) ✅ Power over cable function for easily and clean installation

Easily extend your HDMI signal over long distances with this 4K HDMI Extender over Ethernet. Transmit stunning 4K@30Hz video up to 132 feet and 1080P Full HD up to 230 feet using a single CAT6/7 cable — no signal loss, no lag. Featuring convenient Power over Cable (PoC) technology, this extender requires just one power adapter for both transmitter and receiver. Ideal for home theaters, conference rooms, digital signage, classrooms, and more. Includes local HDMI loop out for on-site display monitoring and a 3.5mm audio out for external audio system integration. Features an EDID toggle switch on the transmitter to help with compatibility issues between the connected input HDMI source device and the display. ✅ HDMI extender over ethernet Cat6/Cat7 ✅ 4K@30Hz up to 132ft. ✅ 1080P up to 230ft. ✅ Features a local HDMI loop out on transmitter for source monitoring ✅ 3.5mm audio extraction port on the receiver for extracting and sending audio to an external sound system ✅ Power over cable (PoC) function; power adapter is only required on the transmitter or the receiver side ✅ IR function to help control the source device from the display’s location ✅ EDID toggle switch to help with compatibility issues between the connected input HDMI source device and the display

The J-Tech Digital JTECH-VW09 4K30Hz 3×3 video wall controller offers a unique and expandable video wall solution for nearly any application. The VW09 video wall controller supports USB Type-C (USB-C), VGA, Display Port and HDMI input source devices allowing it to be an incredibly flexible content sharing solution for a variety of applications including conference rooms and learning centers. Rotate any output image 180° in order to optimize the bezel layout of your video wall. Fine tune any display adjustments with the edge correction function. Users can also utilize the audio extraction function to de-embed or extract source device audio via the SPDIF coaxial or 3.5mm analog audio ports in order to incorporate a 3rd party audio processor. Create a truly immersive viewing experience by cascading multiple JTECH-VW09 video wall controllers together to form a 4K @ 30Hz 10×10 video wall that completely re-invents your interior space and leaves a lasting impression on all viewers. ✅ USB Type-C / VGA / DP / HDMI Inputs ✅3×3 Video Wall (Cascade units up to 10×10 video wall). ✅ 180° Output Image Rotation ✅ Supports Resolutions up to 4K@30Hz. HDCP 1.4 and 2.2 compliant ✅ EDID Management – 4K30Hz & 1080P 60Hz Default EDID ✅ SPDIF & Analog Audio Extraction ✅ 3rd Party Control System Integration via RS232 or LAN Ports

Transform any space with J-Tech Digital’s JTECH- VW0109-AE; 3x3 HDMI Video Wall Processor, designed for professional-grade video walls up to 9 displays. Effortlessly combine multiple screens into a single, seamless 1080p display, while supporting a 4K@30Hz input for stunning clarity. With 13 versatile display modes, including 3x3, 2x2, 2x4, 4x1, and splitter mode, you can tailor your video wall to any layout or installation need. Fine-tune every screen with 180° image rotation and edge masking, ensuring perfect alignment, minimal bezel gaps, and a flawless viewing experience. Extract high-quality audio directly from your source via SPDIF Optical (5.1ch) or 3.5mm stereo (2ch) outputs to your sound system. Control your setup easily with the front panel, IR remote, or RS232 for maximum flexibility. Ideal for digital signage, retail displays, control rooms, or home entertainment setups, this processor delivers professional-quality video wall performance in a compact, easy-to-use design. ✅ Distribute 1 HDMI source to up to 9 HDMI displays to create a video wall ✅ Features 4K@30Hz Input and 1080P Outputs ✅ Supports up to 13 display modes: ✅ 3x3, 2x2, 1x1 (Splitter mode), 2x4, 2x3, 4x2, 3x2, 1x2, 2x1, 1x3, 3x1, 1x4, 4x1 ✅ Features audio extraction function via SPDIF Optical (5ch) and 3.5mm (2ch) audio outputs ✅ Supports 180° image rotation through modes 1-12 ✅ Supports edge masking function through modes 1-12

The JTD-PS5A power adapter is designed for versatile use, supporting a wide input voltage range of AC 100-240V, making it compatible with global power standards. It delivers a stable output of 12V at 5A, providing a total power output of 60W. Included with the adapter is a 1-to-5 power splitter cable, allowing you to power up to five devices simultaneously. While using the power splitter cable, each connector on the splitter cable delivers 12V at 1A, making it ideal for powering multiple low-power devices such as security cameras, LED strips, or small electronics. This power adapter is perfect for use with J-Tech Digital encoders and decoders that are placed in a rack and support 12V 1A, eliminating the need for a power adapter for each of the units. ✅ Input 100-240V ~ 50/60Hz 2.0A and Output 12V 5A 60W ✅ Includes a 1x5 power splitter cable ✅ When using the power splitter cable, each connector outputs 12V 1A ✅ Without the power splitter cable, the connector outputs 12V 5A ✅ Features output connector size 5.5mm x 2.5mm for universal compatibility ✅ Over-voltage, over-current, and short-circuit protection ✅ Wide compatibility with small household electronics. Also works great with J-Tech Digital encoders and decoders placed in a rack, eliminating the need for multiple power adapters

Say goodbye to arm and wrist strain caused by using a traditional mouse! The J-Tech Digital Wireless Vertical Ergonomic Mouse features a design that places your hand in a natural “handshake” position which greatly reduces strain on your wrist and arm especially during extended computer sessions. This wireless mouse features 2.4G wireless and 3.0 / 5.0 Bluetooth modes to allows for 3 multi-device connectivity. Made for small-medium sized hands and right-hand orientation, it’s never too late to start taking advantage of all the benefits that this wireless mouse has to offer! ✅ Features a vertical ergonomic design to reduce arm and wrist strain ✅ Works with 2.4G wireless and 3.0 / 5.0 Bluetooth modes. 3 multi-device functionality allows for connecting 3 devices and easy switching ✅ 3 power saving (sleep) modes: ✅ Level 1: Mouse inactive for 5s – 1 min. When mouse is moved, it wakes up ✅ Level 2: Mouse inactive for 1 min – 30 mins. When mouse is moved, it wakes up ✅ Level 3: Mouse inactive for more than 30 mins. Press a button to wake up the mouse ✅ 5 adjustable DPI modes; 800 / 1200 / 1600 / 2400 / 4000. Compatible with Windows and Mac OS

The JTD-USB-2HDMI dual HDMI adapter allows you to easily extend your desktop to multiple displays using a single USB 3.0 Type A or C input port. Featuring 2 HDMI outputs, the adapter supports dual resolution with 1 HDMI port supporting up to 4K 30Hz and the other at 1080P 60Hz. Extend up to 8 displays on Windows and 6 displays on Mac OS. The JTD-USB-2HDMI is powered by either the USB-A or USB-C ports, eliminating the need for an external power adapter. It is compatible with USB-C, USB-A, Thunderbolt 3/4, and USB 4 standard ports, and can decode multiple video formats such as H.264, H.263, MP4, MP2, DivX, AVS, JPEG, and more. Providing a plug & play function, easily integrate the JTD-USB-2HDMI adapter within your setup today, and enjoy the convenience of multiple displays today! ✅ USB 3.0 Inputs, featuring USB-A and USB-C ✅ 2 x HDMI Output with dual resolution (4K@30Hz and 1080P 60Hz) support ✅ Powered by USB. No need for an external power adapter ✅ Supports different display modes, such as Mirror / Extend ✅ Extend up to 8 displays on Windows and 6 displays on Mac OS using a USB hub ✅ Easy setup with plug & play function ✅ Works with Windows 7/8/8.1/10 and above, Mac OS 10.10.x and above, Android 7.1 and above

This encoder will take an HDMI audio/video signal, encode it using H.264, and give you the power to choose where to stream it to. Choose from any popular video upload site/service, one or more LAN computers using VLC/multicast, or a local surveillance system using ONVIF. ✅ Supports H.264 encoding / UDP, HTTP, RTSP, RTMPS, RTMP, ONVIF, MPEG1 Audio Layer 2 / CBR/VBR rate: 16Kbps ~ 16Mbps ✅ 100 M network interface uses full duplex mode / Supports up to 720p, 1080p@60Hz HD video input / Support image parameter settings ✅ WEB interface management authority / Support remote management in WAN (WEB)/ Customized resolution settings ✅ One button factory reset

The JTECH-P8 is a programmable control panel that is designed to control your audio/video devices using infrared (IR), RS-232, RS-485, and relay communication. Every button on the wall plate is programmable and works either individually or together. This programmable control panel consists of 3x RS232, 1x RS485, 3x IR, 2x relays, and 1x mini USB interface for easy, one-touch programming. The RS-232 (1) and IR (2) share the same port and cannot be used at the same time. Also, RS232 (2) and IR (3) share the same port and cannot be used at the same time. With this unit you can fully control our products as well as third-party devices such as projectors, screens, TVs, etc. To download pre-configured drivers and RS-232 commands for the device you wish to control, visit J-Tech Digital's website or contact J-Tech Digital's support team. ✅ Program using: USB cable (included) or RS-232 cable (not included) ✅ Program port: USB or RS-232 ✅ Output port: 3x RS-232, 1x RS-485, 3x IR, 2x relay ✅ Serial control port: RS-232 ✅ Baud rate/protocol: 9600 baud, 8 data bits, 1 stop bit, no parity ✅ Frequency response: 20Hz, 20KHz ✅ Power supply: DC 12V/2A

The J-Tech Digital JTECH-UHC-4K30 UVC to HDMI Converter instantly transforms any UVC-compatible USB camera into a high-quality HDMI output for monitors, TVs, projectors, capture cards, and broadcast systems, making it ideal for live streaming, presentations, conferencing, and monitoring. Designed for long-term, reliable operation, it simultaneously charges your camera for uninterrupted use while an attached USB mouse allows easy on-screen adjustments to resolution, audio output, color saturation, brightness, and other settings without any software required. Fully compatible with popular USB cameras (webcams, action cameras, PTZ cameras etc), this plug-and-play converter delivers clean and stable HDMI video for both professional and everyday applications. ✅ Converts UVC USB camera signals to HDMI output for monitors, TVs, projectors, and capture cards. ✅Dual USB ports allow mouse control of camera settings directly through the connected HDMI display. ✅Supports simultaneous camera charging and video streaming through the same USB connection. ✅Compatible with a wide range of UVC USB cameras including webcams, action cameras, and PTZ cameras. ✅Powered through a reliable USB-C port for stable operation.

The J-Tech Digital JTECH-ENCH58 8 input HDMI H.264 H.265 MJPEG Livestream encoder is an IPTV live streaming device offered by J-Tech Digital used to get your event or content online. Broadcast up to eight 1080P 60Hz HDMI input signals to multiple streaming platforms like YouTube Live, Facebook Live and Twitch simultaneously. This J-Tech Digital 1080P H.265 / H.265 / MJPEG IPTV encoder supports multiple protocols (UDP | HTTP | RTSP | RTMP | FLV | ONVIF) so that you can share your message, no matter the needed format. Broadcast your message beyond your walls and establish your online presence today. ✅ Supports H.264 | H.265 | MJPEG Encoding ✅ Supports UDP, HTTP, RTSP, RTMP, FLV, ONVIF Protocols ✅ CBR/VBR Rate: 32 Kbps – 32 Mbps ✅1000M Network Interface uses Full-Duplex Mode ✅ Supports up to 1080P 60Hz HD Video Input and Output Stream Resolution ✅ Supports Image Parameter Settings ✅ Supports Remote Management in WAN (WebGUI) ✅ Supports Customized Resolution Settings