jtechdigital

Experience superior signal distribution with the J-Tech Digital HDMI 1x2 Splitter, the most advanced HDMI 1.4–certified splitter on the market. With one HDMI input and two independent HDMI outputs, this splitter allows you to connect multiple displays without any loss in quality, even when only one display is active. Enjoy stunning Ultra HD 4K (3840×2160) and Full 3D video support with deep color up to 36-bit, ensuring vibrant and lifelike visuals. Compatible with high-definition audio formats including DTS-HD, Dolby TrueHD, LPCM 7.1, and DSD, it delivers a rich, immersive sound experience. ✅ HDMI 1.4b compliant for reliable performance. ✅ Full 3D video compatibility. ✅ Supports resolutions up to 3840×2160@30Hz (4K). ✅ Maximum baud rate of 3.2G and bandwidth up to 320MHz. ✅ Deep color support for 8/10/12-bit. ✅ AWG26 HDMI cable compatibility: input up to 10m, output up to 15m (for 4K, input up to 5m, output up to 10m). ✅ Ideal for displaying single-source, multi-output HD signals from DVD players, AV receivers, or set-top boxes. ✅ Powered by 5V / 1A adapter.

J-Tech Digital's JTD-MINI-1x2SP 4K splitter allows you to take an audio/video signal from 1 source device, and distribute that to 2 displays. Supports up to 4K 60Hz 4:2:0 resolution, and backwards compatible with 1080P, 720P etc. Perfect for using with Blu-Ray players, Gaming Consoles, Desktop and Laptops. Easily integrate this unit within your setup whether it's a residential or commercial environment. ✅ 1 HDMI Input | 2 HDMI Outputs ✅ Resolution support up to 4K 60Hz 4:2:0 ✅ Supported Audio: LPCM,Dolby-AC3, DTS7.1, DSD/Dolby TrueHD/DTS-HD master audio ✅ EDID Duration: 6 seconds ✅ 3D ready (Compatible display & source required)

Distribute one HDMI source to up to four displays simultaneously with this true HDMI 1.4 Certified 1x4 HDMI Splitter. Designed for performance and reliability, it supports Ultra HD 4K (3840×2160) resolution, 3D video, and deep color up to 36-bit for stunning picture quality. Enjoy full compatibility with advanced audio formats, including DTS-HD, Dolby TrueHD, LPCM 7.1, DTS, Dolby-AC3, and DSD. Each output is independent, ensuring smooth operation even when only one display is active. Built to handle longer cable runs, this splitter supports input cable lengths up to 80 ft and output lengths up to 50 ft using AWG26 HDMI cables. With HDMI signal retiming, you’ll experience zero loss of quality for clear, reliable transmission every time. ✅ 1 HDMI input signal splits to 4 HDMI sink devices simultaneously. ✅ HDMI 1.4a compliant. ✅ 3D video support with frame packing for all 3D formats up to a 297MHz TMDS clock. ✅ Display resolutions up to 4K@30Hz, 1080P@120Hz, and 1080P 3D@60Hz. ✅ Deep color support: 30-bit, 36-bit, and 48-bit per pixel. ✅ Digital audio format support: DTS-HD, Dolby TrueHD, LPCM 7.1, DTS, Dolby-AC3, and DSD.

The JTECH-4KSP2 1 x 2 HDMI splitter is a Multi-Resolution Output HDMI scaler switcher that can support various UHD resolutions. This 1 x 2 HDMI splitter is perfect for users that are in the process of upgrading their entertainment centers and need a device that supports 4K and 1080p resolutions, allowing them to integrate newer, more advanced displays without having to replace their older model displays. *Please Note: the MRO series splitters do not downscale to 720P. They do not change the scan type (Progressive vs Interlaced) and they do not downscale HDR Metadata (HDR/HDR10/Dolby Vision). ✅ Supports up to 4K/60 Hz 4:4:4 HDR 10 and Dolby Vision ✅ HDCP 2.3 Compliant ✅ Built in signal equalizer (allows for the use of longer-range HDMI cables) ✅ EDID copy priority follows Output 1 > Output 2 ✅Supports 4K to 1080p, downscaling up to all output resolutions ✅Front panel HDMI downscale function on/off switch | Convenient firmware upgrades ✅ Power Supply: DC 5V/1A

The JTECH-SP12M18G is a 1 In 2 Out – 1x2 HDMI splitter that allows you to distribute a signal from one HDMI source to two displays simultaneously, mirroring the source on both screens. Supporting up to 4K@60Hz resolution with HDMI 2.0 and HDCP 2.2 compliance, it delivers stunning visual quality while remaining compatible with 1080P FHD. Its 4K-to-1080P downscaling feature enables seamless integration of mixed displays, letting you send 4K signals to a 4K screen and 1080P to a 1080P display at the same time. Equipped with three EDID settings—auto, copy, and downscale—it resolves compatibility issues effortlessly and supports both compressed and uncompressed digital audio formats. ✅ Distribute 1 HDMI signal to 2 displays simultaneously ✅ 1 HDMI input to 2 HDMI outputs for a 1x2 setup ✅ Note that this HDMI splitter duplicates/mirrors the signal, and does not extend the image ✅Supports up to 4K@60Hz resolution ✅Features 3 EDID settings; auto, copy, and downscale ✅4K > 1080P downscaling enables seamless compatibility with displays of different resolutions within your setup. ✅ Supports compressed and uncompressed digital audio formats

The JTECH-18GSP14M Splitter is an MRO (Multi-Resolution Output) splitter and can support various resolutions to the outputs. With 3 different EDID settings, you have the option of copying the EDID settings from your display for compatibility, mixing the output resolutions allowing for the combination of 4K and standard definition displays, and a fixed setting to distribute a 4K video signal to 4 displays. This MRO splitter is perfect for users that are gradually upgrading their entertainment centers and need a device that supports 4K and 1080p allowing for the integration of brand new displays while still making use of older and outdated ones. NOTE: the MRO series splitters do not downscale to 720P. They do not change the scan type (Progressive vs Interlaced) and they do not downscale HDR Metadata (HDR/HDR10/DolbyVision) ✅ Input ports: x1 HDMI ✅ Output ports: x4 HDMI ✅ HDMI Compliance: HDMI 2.0, HDMI 1.4 ✅ HDCP Compliance: HDCP 2.2, HDCP 1.4 ✅ HDMI Resolution: 4Kx2K@24/30/60Hz, 1080i/1080p ✅ Supports HDR10 and Dolby Vision ✅ 36-bit Deep Color

The JTECH-4KSP4 1 x 4 HDMI splitter is a Multi-Resolution Output HDMI scaler switcher that can support various UHD resolutions. This 1 x 4 HDMI splitter is perfect for users that are in the process of upgrading their entertainment centers and need a device that supports 4K and 1080p resolutions, allowing them to integrate newer, more advanced displays without having to replace their older model displays. *Please Note: The MRO series splitters do not downscale to 720P. They do not change the scan type (Progressive vs Interlaced) and they do not downscale HDR Metadata (HDR/HDR10/DolbyVision) ✅ Supports up to 4K/60 Hz 4:4:4 HDR 10 and Dolby Vision | HDMI 2.0, HDCP 2.3 Compliant ✅ Built in signal equalizer (allows for the use of longer-range HDMI cables) | EDID copy priority follows Output 1 > other outputs ✅ Supports 4K to 1080p, downscaling up to all output resolutions ✅ Front panel HDMI downscale function on/off switch | Power Supply: DC 5V/1A

Easily mirror one HDMI source to two displays with this 1x2 8K HDMI Splitter, perfect for home theaters, gaming setups, office presentations, or digital signage. It supports ultra-high-definition resolutions up to 8K@60Hz, 4K@120Hz, and 1080P@240Hz, along with HDMI 2.1, HDCP 2.3, HDR, HDR10+, and Dolby Vision, ensuring stunning color, sharp detail, and smooth motion on both screens. Featuring 8K downscaling and three EDID modes (Auto, Copy, Downscale), it ensures seamless compatibility between displays with different resolutions. Enjoy rich, immersive sound with support for LPCM, DTS, Dolby Digital, DTS-HD Master Audio, and Dolby TrueHD audio formats. With its plug-and-play design, stable signal transmission, and intelligent EDID management, this HDMI splitter makes dual-screen viewing simple and reliable, without compromising picture or sound quality. ✅ Distribute 1 HDMI signal to 2 displays simultaneously with this 8K HDMI Splitter ✅Note that this HDMI splitter only mirrors the signal on both displays. It does not extend the signal ✅Ultra HD resolution and high refresh rates ✅Supports 8K@60Hz, 4K@120Hz, 1080P@240Hz ✅Features an EDID button with 3 modes; Auto, Copy, and Downscale ✅8K to 4K or 1080P downscaling function allows for displays with different resolutions to be used within the same setup ✅HDMI 2.1 standard support; HDR, HDR10, HDR10+, Dolby Vision ✅Supports CEC function, and HDCP 2.3 / 2.2 / 1.4 compliance ✅Uncompressed audio such as DTS, Dolby Digital, DTS-HD Master Audio, Dolby TrueHD etc.

The JTD3DSP0108 1x8 splitter will allow you to connect a single HDMI source, such as a cable box, or DVD player, to 8 HDMI displays, including TVs, monitors and projectors. Experience video in a full 1080P resolution, and even 3D when using a compatible source and display. With the JTD3DSP0108 you can also enjoy HD audio as well with supported digital audio formats that include Dolby Digitall, DTS, DSD and more. With a Deep Color 36-bit color depth you will see much more realistic colors on your display when using the JTD3DSP0108. ✅ HDMI Compliance – HDMI 1.3b ✅HDCP Compliance – HDCP 2.2 ✅HDMI Connector – Type A 19-pin female ✅Supported Video Formats – 480i, 576i, 720P, 1080i, 1080P, 3D video ✅Supported Audio Formats – AC3/Dolby Digital, DTS, DTS-HD, DSD, Dolby-True-H, LPCM7.1 ✅Power Consumption – 10 watts (Maximum)

The JTECH-8KSP12 is a 1 In 2 Out HDMI splitter that supports up to 8K@60Hz resolution, along with 4K@120Hz and 1080P@240Hz. It is compatible with HDR / HDR10 / HDR10+, Dolby Vision, and also features 3 different EDID modes to ensure compatibility between your different resolution displays. Take advantage of digital audio formats, such as DTS, Dolby Digital, Dolby TrueHD, along with all of the features supported by HDMI 2.1. The JTECH-8KSP12 is also HDCP 2.3 compliant along with HDCP 2.2 and 1.4 backwards compliant to ensure compatibility between different sources and displays. Take advantage of the JTECH-8KSP12 splitters downscaling function where it can downscale an 8K@60Hz signal to either 4K or 1080P depending on the display involved. This splitter is perfect for situations where users may have 2 different displays that support 2 different resolutions. Plug and play function ensures a ready state, so go ahead and integrate this splitter within you setup today! ✅ Resolution support up to 8K@60Hz, 4K@120Hz, 1080P@240Hz ✅ Compatible with HDR / HDR10 / HDR10+ / Dolby Vision ✅ HDMI 2.1 | HDCP 2.3 (backwards compatible with 2.2 and 1.4) ✅ 3 Different EDID modes; Auto, Copy, and Downscaling ✅ Downscales 8K resolution to 4K or 1080P depending on the connected display ✅ Digital audio format support, such as DTS, Dolby Digital, Dolby TrueHD etc. ✅ Supports CEC function

Easily mirror a single HDMI source to four displays with this 1 In 4 Out 8K HDMI Splitter, perfect for home theaters, gaming setups, or digital signage. Supporting 8K@60Hz, 4K@120Hz, and 1080P@240Hz, along with HDMI 2.1, HDCP 2.3, HDR, HDR10+, and Dolby Vision, it delivers stunning visuals on every screen. The splitter features 8K downscaling and three EDID modes (Auto, Copy, Downscale) to ensure seamless compatibility across displays of different resolutions. Enjoy rich, immersive audio with support for LPCM, DTS, Dolby Digital, DTS-HD Master Audio, and Dolby TrueHD. With plug-and-play setup and smart EDID management, this HDMI splitter makes multi-screen viewing effortless without compromising picture or sound quality. ✅ Distribute 1 HDMI signal to 4 displays simultaneously with this 8K HDMI Splitter ✅ Note that this HDMI splitter only mirrors the signal on all displays. It does not extend the signal ✅ Ultra HD resolution and high refresh rates ✅ Supports 8K@60Hz, 4K@120Hz, 1080P@240Hz ✅ Features an EDID button with 3 modes; Auto, Copy, and Downscale ✅ 8K to 4K or 1080P downscaling function allows for displays with different resolutions to be used within the same setup ✅ HDMI 2.1 standard support; HDR, HDR10, HDR10+, Dolby Vision ✅ Supports CEC function, and HDCP 2.3 / 2.2 / 1.4 compliance ✅ Uncompressed audio such as DTS, Dolby Digital, DTS-HD Master Audio, Dolby TrueHD etc.

The J-Tech Digital JTD4KSP0108 HDMI Splitter is a product which can distribute HDMI signal without loss to one or more display terminal device such as HDTV. It can optimize your home theatre system to the best effect. Fully HDMI 1. 4 Specification compliant. It is applicable to source device and high definition display terminal device such as Blu-ray Players and HDTV which have HDMI interfaces or digital interfaces. Supports high resolutions up to 4Kx2Kat30Hz, including 480i/P, 576i/P, 720i/P, 1080i, 1080p; Supports 12-bit Deep Full HD, Full 3D and 4Kx2K video; supports standard Audio, DSO Audio, HD (HBR) Audio. Extend the transmission distance and improve transmission signal with ease. ✅ One HDMI input signal split to eight HDMI sink devices ✅ Supports 3D, CEC, deep color 30bit, 36bit ✅ Supports Blu-Ray 24/50/60fs/HD-DVD/xvYCC ✅ Digital audio formats, as DTS-HD/Dolby-trueHD/LPCM7 1/DTS/Dolby-AC3/DSD ✅ Supports signal re-timing ✅ Input up to 15 meters AWG26 HDMI standard cable length ✅ No loss of quality ✅ Installs in minutes ✅ Works with DC5V/3A power supply

The JTECH-18GSP18M Splitter is an MRO (Multi-Resolution Output) splitter and can support various resolutions to the outputs. With 3 different EDID settings, you have the option of copying the EDID settings from your display for compatibility , mixing the output resolutions allowing for the combination of 4K and standard definition displays, and a fixed setting to distribute a 4K video signal to 8 displays. This MRO splitter is perfect for users that are gradually upgrading their entertainment centers and need a device that supports 4K and 1080p allowing for the integration of brand new displays while still making use of older and outdated ones. *Please Note: the MRO series splitters do not downscale to 720P. They do not change the scan type (Progressive vs Interlaced) and they do not downscale HDR Metadata (HDR/HDR10/DolbyVision) ✅ Input ports: x1 HDMI ✅ Output ports: x8 HDMI ✅HDMI Compliance: HDMI 2.0, HDMI 1.4 ✅ HDCP Compliance: HDCP 2.2, HDCP 1.4 ✅ HDMI Resolution: 4Kx2K@24/30/60Hz, 1080i/1080p ✅ Supports HDR10 and Dolby Vision ✅ 36-bit Deep Color ✅ Can support online firmware upgrades via Micro USB Port (if applicable)

The JTECH-14EXP is an HDMI extender and splitter that efficiently extends a 1080P 60Hz HDMI A/V signal up to 164 feet using a single Cat5e/6 ethernet cable (per receiver). This system features 1 input and 4 outputs, complete with four receivers, and includes a local HDMI loop-out on the transmitter for connecting a fifth display to monitor the source. The Power Over Cable (PoC) function minimizes clutter by requiring only the transmitter to be connected to a power adapter, with the receivers drawing power through the ethernet cables. Additionally, the JTECH-14EXP offers IR control, allowing easy remote operation of your source device from any display location. It supports various digital audio formats and includes an EDID toggle switch to ensure optimal audio compatibility. With its plug-and-play setup, this unit is ideal for both commercial and residential setups, providing a tidy and efficient configuration. ✅ Extends 1080P 60Hz Signal: Transmits up to 164ft over a single Cat5e/6 (per receiver) ethernet cable ✅ 1 HDMI Input, 4 HDMI Outputs: Includes a local HDMI loop-out port for additional display connectivity ✅ Power Over Cable (PoC) Functionality: Only the transmitter requires a power adapter; receivers are powered through the ethernet connection ✅ Supports Digital Audio: Features support for various digital audio formats and includes an EDID toggle switch to ensure optimal audio compatibility ✅ IR Control: Enables remote source device management directly from the display's location

Are you running a trade show and need an easy way to setup multiple HD displays showcasing your product? Do you have a sports bar or recreation center with HDTVs set up everywhere for your customers to watch the big game? Or do you just want to have a TV in every room of your house, so you can do your household chores without missing a moment of your favorite TV show? This J-Tech Digital 1x8 HDMI Amplifier Splitter delivers! This is the perfect solution for when you need to distribute a video signal to multiple displays over long distance. It takes a single HDMI input and splits it into one HDMI output and seven Ethernet signals, which are then transmitted over a single Cat5e/6 cable each for to a distance of up to 164 feet. The receiver unit at the end then converts the signal back to HDMI for use by the display. ✅ Distributes 1 input HDMI signal to 8 HDMI outputs | Transmission distance up to 164 ft. under 1080p over single Cat5e or Cat6 cable ✅ Features local HDMI loop-out on transmitter to allow source monitoring via a local display ✅ Bi-directional IR control allows you to control your source device from displays location or vice versa ✅ Supports High Definition Audio: Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio etc. ✅ Supports 30/36 bit deep color display; Support 3D technology ✅ Easy to install - just plug it in and start using it right away!

The JTECH-14EX60-AE HDMI extender splitter allows users to split an incoming HDMI signal to up to 4 displays. With the use of the included receivers, that signal can be extended up to 196ft. over single Cat5e/6 cable (per receiver) with ease. It also supports 4K > 1080P downscaling feature on the receiver end, so that users can utilize different resolution monitors within their setup. A local HDMI loop-out port is available on the transmitter so that users can monitor the source content on their remote displays via a local display. The JTECH-14EX60-AE also features PoC, where a power adapter is only required for the transmitter, and the receivers get their power from the transmitter via the connected ethernet cables, making for a clean setup. Take advantage of the audio extraction feature, and extract audio from the incoming HDMI signal, and send it to your favorite external sound devices via Optical and/or 3.5mm analog. Bi-directional IR gives users the ability to easily control their source device from the display’s location or vice versa. Built-in EDID DIP switch allows for different settings to help with source device and display audio/video format compatibility. ✅ Extend 4K@60Hz HDMI signal up to 196ft. over single Cat5e/6 ethernet cable (per receiver). HDMI 2.0 and HDCP 2.2 compliant ✅Features 1 HDMI input, 4 HDMI outputs, and a local HDMI loop-out port on the transmitter. Supports HDR10 and HLG ✅Audio extraction function available via Optical or 3.5mm audio outputs ✅Supports 4K > 1080P downscaling function (downscales on the receiver end) ✅PoC function; power adapter is only required for the transmitter, and the receivers get power from transmitter via the connected ethernet cable ✅Built-in EDID DIP switch with different settings to maintain audio/video format compatibility between source devices and displays. Supports Bi-directional IR function

The J-Tech Digital JTECH-14EX50 is an HDMI 2.0 splitter extender over single CAT cable. Designed to distribute your 4K HDMI source signal to multiple displays, the JTECH-14EX50 is fully HDMI 2.0 and HDCP 2.2 compliant. The JTECH-14EX50 features 4 PoC (power over cable) receivers that don’t require additional power adapters that can clutter up your installation. With the JTECH-14EX50, you have the ability of not only splitting your 4K source signal to 4 displays but the capability to extend the distance from your source to your displays as well. Utilizing the JTECH-14EX50 as a splitter/extender allows you to transmit your 4K 60Hz source signal up to 114 feet away over a single CAT6 cable while also connecting a 4K display to the transmitter’s local HDMI loop output. ✅ HDMI 2.0 | HDCP 2.2 Compliant ✅ 18 Gbps Video Bandwidth ✅ Supports Resolutions up to 4K@60Hz 4:4:4 ✅Supports 3D | HDR10 | HDR10+ | HLG | Dolby Vision ✅ Transmission Distance: 114 Feet (4K60) | 164 Feet (4K30) | 196 Feet (1080p60)

The J-Tech Digital JTECH-18EX50 is an HDMI 2.0 splitter extender over single CAT cable. Designed to distribute your 4K HDMI source signal to multiple displays, the JTECH-18EX50 is fully HDMI 2.0 and HDCP 2.2 compliant. The JTECH-18EX50 features 8 PoC (power over cable) receivers that don’t require additional power adapters that can clutter up your installation. With the JTECH-18EX50, you have the ability of not only splitting your 4K source signal to 8 displays but the capability to extend the distance from your source to your displays as well. Utilizing the JTECH-18EX50 as a splitter/extender allows you to transmit your 4K 60Hz source signal up to 114 feet away over a single CAT6 cable while also connecting a 4K display to the transmitter’s local HDMI loop output. ✅ HDMI 2.0 | HDCP 2.2 Compliant ✅ 18 Gbps Video Bandwidth ✅Supports Resolutions up to 4K@60Hz 4:4:4 ✅Supports 3D | HDR10 | HDR10+ | HLG | Dolby Vision ✅Transmission Distance: 114 Feet (4K60) | 164 Feet (4K30) | 196 Feet (1080p60) ✅Local HDMI Loop Output Port ✅Advanced EDID Management ✅Supports PoC & IR Control Signal Pass-Thru