jtechdigital

4K HDMI Extender over Cat5e/Cat6 – HDBaseT 230ft 1080P / 130ft 4K HDMI 2.0 Extender with IR & RS232 Extend your HDMI signal over long distances with this HDBaseT HDMI Extender, delivering uncompressed 4K@60Hz (4:2:0) video up to 130 ft (40m) and 1080P up to 230 ft (70m) using a single Cat5e/6 Ethernet cable. Enjoy flawless, high-definition video and audio transmission without signal loss or delay. Compatible with HDMI 2.0 and HDCP 2.2/1.4, this extender supports a full range of resolutions including 4K, 1080P, 720P, 576P, and 480P, along with premium audio formats like LPCM, DTS-HD, Dolby TrueHD, and Dolby Digital. Includes bi-directional IR (20~60kHz) for remote control from either end and a Phoenix RS232 port for firmware updates or serial control integration. For the best performance, use solid copper Cat6 Ethernet cable—we recommend the J-Tech Digital 150ft Cat6 cable (model JTD-943) for optimal results. ✅ Plug-and-play pair of full-function modules, no configuration required. ✅ Uses a single UTP/STP LAN cable (CAT-5E/6) to replace HDMI for long-distance transmission. ✅ UTP/STP cable termination follows IEEE-568B standard. ✅ Transmission distance up to 70 meters for 1080P and up to 40 meters for 4K video. ✅ POC function (receiver powered by transmitter). ✅ HDCP 2.2 and 1.4 compliant. ✅ Full HD support: 1080P@60Hz@48bit, 3D, and 4Kx2K video formats. ✅ LED indicators display power status. ✅ Built-in ESD protection. ✅ Includes mounting ears for easy installation. ✅ Transfers bidirectional IR control signals along with HDMI signal. ✅ Phoenix RS232 port for firmware updates or RS232 signal transmission.

4K HDMI Extender over Cat5e/Cat6 – HDBaseT PoC Extender with IR & RS232 Control Extend high-quality HDMI signals over long distances with this HDMI Extender over Cat5e/Cat6 Ethernet cable, supporting resolutions up to 4K@60Hz (4:2:0) and 1080P up to 230 ft (70m). (Note: 4K 4:4:4 format not supported.) The unit features PoC (Power over Cable) technology—powering the receiver directly from the transmitter via a single Ethernet cable, simplifying installation and reducing clutter. Fully HDCP 2.2 / 1.4 compliant, this extender includes built-in ESD protection for safe, reliable operation. Enjoy bi-directional IR control and RS232 connectivity for firmware updates or serial command integration. Ideal for home theaters, conference rooms, classrooms, and digital signage applications, this extender delivers stable, high-quality video and audio transmission across long distances. ✅ HDMI 1.4 and HDCP 2.2 compliant. ✅ Transmission distance up to 40m for 4Kx2K and 70m for 1080p. ✅ Bi-directional 5V IR and RS232 pass-through for long-distance control. ✅ Bi-directional PoC for simplified wiring. ✅ CEC functionality supported. ✅ DIP switch for selecting Control or Update mode

The JTECH-HDT150 extender, can transmit a High-Definition 1080P signal up to 500 feet (150 meters) using the latest HDBaseT transmission protocol. With the JTECH-HDT150 extender, you have many different resolutions options to choose from, including common PC resolutions with 16:10 aspect ratios, such as 1920x1200, so you will not be limited to only “TV-friendly” source devices or monitor displays. This extender is powered by bi-directional POC, and only requires power to be connected to either the receiver or the transmitter, allowing for discreet installation. The JTECH-HDT150 uses an EDID passthrough that will automatically detect which resolutions and audio format are compatible with your display, set them to the highest options available. The JTECH-HDT150 also passes CEC commands, allowing source devices and displays that support CEC to also be turned on or off through the extender. The JTECH-HDT150 also passes RS-232 commands, to control devices for serial communication transmission of data.. ✅ HDMI Compliance: HDMI 1.4 | HDCP Compliance: 1.4 ✅ Video Resolutions: up to 1080P@60Hz | Transmission distance up to 492ft. over single Cat5e/6 ethernet cable using HDBaseT Protocol ✅ Audio Formats: LPCM 2/5.1/7.1ch, Dolby Digital, DTS 5.1, Dolby TrueHD, Dolby Atmos, DTS:X ✅ Supports RS232, Power over Cable, Bi-Directional IR

The JTECH-UHDT150 is a professional UHD 4K@60Hz 4:4:4 HDR HDMI over ethernet extender solution. Users can transmit a 4K 60Hz signal up to 394 feet away over a single Cat5e/Cat6 ethernet cable. The JTECH-UHDT150 transmitter features a local HDMI output port for splitting your source signal locally and extending an output to a remote display. Utilize the built-in PoC (Power over Cable) function and power both your transmitter and receiver from only one power adapter. Installation is simple, quick and easy. The JTECH-UHDT150 will pass your display’s EDID information to your connected source device so that any signal compatibility issues will be resolved before they even begin. Flexible and appropriate for any application, the UHDT150 supports the latest audio and video standards including – HDR | HDR-10 | Dolby Vision | Dolby Digital + | DTS-HD Master & Dolby TrueHD. ✅ Supported Resolutions – 4K@60Hz (YUV 4:4:4), 4K@30Hz, 1080p/1080i, 720p/720i ✅ Supported Audio Formats – PCM, Dolby Digital 5.1, DTS 5.1, Dolby Digital + ✅ HDR Supported – HDR (8-bit) | HDR-10 (10-bit) | Dolby Vision (12-bit) ✅ Extend 1080P signals up to 492 ft and 4K signals up to 394 ft via single Cat5e/6 cable; HDMI Loop Output port on the transmitter ✅ HDMI 1.4 and 2.0 Compliant | HDCP 1.4 and 2.2 Compliant; De-embedded stereo audio output port on the receiver

The JTECH-MXT40B is a professional 4K 60HZ UHD matrix switch extender that can extend a 4K signal up to 130ft., and a 1080P signal up to 230ft. via HDBaseT over a single CAT5e/6 cable. Included are 4 HDMI inputs, and 4 local HDMI outputs along with 4 HDBaseT outputs for 4 included receivers. Each receiver provides 2 HDMI outputs, so users can connect a total of 12 displays to one matrix. Easily distribute and route your signal using the JTECH-MXT40B via web-based interface, RS232 commands, included IR remote, front panel buttons, or by using the J-Tech Digital Control App for Android and iOS. With support for HDR and Dolby Vision, enjoy your content without making any compromises for quality. The built in PoC function allows the HDBaseT receivers to get power from the main matrix, effectively keep your setup clean without any unnecessary cables. ✅ 4 HDMI inputs | 4 local HDMI outputs + 4 HDBaseT outputs. Dual HDMI outputs per HDBaseT receiver ✅ Extend 4K up to 130ft., and 1080P up to 230ft. | Supports up to 4K 60Hz 4:4:4 resolution ✅ Audio formats, such as PCM, Dolby Digital 5.1, DTS 5.1, Dolby Digital + ✅ HDMI 1.4 / 2.0 compliant | HDCP 1.4 / 2.2 compliant | Supports HDR / HDR 10, and Dolby Vision. (Dolby Vision supported by local HDMI outputs only) ✅ Power over cable function for easily and clean installation

The JTECH-4K88-EX2B is a 4K 60Hz matrix switch extender that can extend a 4K 60Hz signal up to 131ft., and a 1080 60Hz signal up to 230ft. via HDBaseT over single CAT5e/6 cable. Offering 8 HDMI input ports for connecting 8 different source devices, users can easily distribute their A/V signal to any of the connected displays. 7 included HDBaseT receivers offer dual HDMI output ports, and 1 local HDMI output port is available on the matrix itself. Different control options make the JTECH-4K88-EX2B easily to operate. Control the device via front panel buttons or the included IR remote, or utilize the web-based interface or the J-Tech Digital Control App for any routing purposes. Drivers available for Control 4 help with easy 3rd party control integration. The PoC function allows the HDBaseT receivers to get power from the main matrix unit, while the bi-directional IR feature allows user to control their source device from the display’s location, or vice versa. ✅ 8 x HDMI Inputs | 7 x HDBaseT Outputs (Each HDBaseT receiver supports dual HDMI Outputs) + 1 local HDMI Output ✅ Supports up to 4K 60Hz 4:4:4 resolution | Extend 4K 60Hz up to 131ft., and 1080P 60Hz up to 230ft. ✅ Supports HDMI 2.0 features | HDCP 2.2 compliant | HDR / HDR-10 / Dolby Vision supported. (Dolby Vision is only supported via the local HDMI output) ✅ Power over cable function | Bi-directional IR | RCA / SPDIF audio extraction ✅ Control via front panel, IR remote, RS-232, web interface, J-Tech Digital Control App | Control 4 drivers available from J-Tech Digital